BWT bestaqua 16 ROC Caractéristiques Techniques, Instructions De Montage Et De Service page 22

20
7.2 Error rectification
App screen
vacuum
permeate
leakage
fault
inlet h2o
meter
pump
pressure
Flashing LEDs
ON
OFF
ON
OFF
Status LED turns red
and a warning signal
sounds.
ON
OFF
ON
OFF
Status LED turns red
and a permanent warn-
ing signal sounds.
ON
OFF
x3 x3
ON
OFF
The status LED
repeatedly flashes
three times.
123 18.3
186
uS C°
COND TEMP DAYS
0.6 0.6
bar bar
OUTLET PRESS PUMP PRESS
fault 1033
liter hours
INLET WATER
09852 090
liter liter/hour
OUTLET WATER OUTLET FLOW
ON
info back
OFF
x4 x4
ON
OFF
The status LED repeat-
edly flashes four times.
Cause
Pressure sensor for
permeate is defective.
Leak or condensation
inside the device.
The inlet water meter
is blocked or has no
power supply.
Pump pressure is too
high.
Remedy
Disconnect device
from electricity and
water supply.
Inform service staff.
Disconnect device
from electricity and
water supply.
Inform service staff.
Permeate is still pro-
duced but the inlet
water volume is not
recorded.
Check power supply.
Inform service staff.
Check the flow in the
concentrate line.
Press the red icon in
the app to restart.