Power Adapter; Power Supply - Philips AZ 7376 Mode D'emploi

Power adapter

1 Make sure that the local voltage corresponds
to the voltage of the adapter (see
accessories).
2 Connect the power adapter to the player's
4.5 V DC socket and to the wall outlet.
• Always disconnect the adapter when you are
not using it.
Batteries, type LR6, UM3 or AA
• Open the battery compartment and insert 2
alkaline batteries.
Typical playing times under normal conditions:
Alkaline batteries: 5.5 hours (ESA off)
• Remove the batteries if they are dead or if the
CD player is not to be used for a long time.
Note: In the right-hand corner of the display the battery condition will be indicated:
-Full batteries: no indication.
-Weak batteries:
rechargeable batteries are used.
-Dead batteries:
the batteries or connect the power adapter.
Batteries contain chemical substances, therefore they should be disposed of
properly.
4.5 hours (ESA on)
-symbol lights up. This symbol is not available when
-symbol flashes and the message bAtt appears. Replace

POWER SUPPLY

(supplied or optional available)
7