Setting The Clock - JVC KD-AR5000 Manuel D'instructions

4
To activate the display demonstration, repeat
the same procedure and select any one other
than "Off" in step 3 .
• For more details, see "To show the display
demonstration" on page 29.
○ ○ ○ ○ ○ ○ ○ ○ ○

Setting the clock

You can also set the clock system to 24 hours or
12 hours.
1
2
3
Select "CLOCK."
Now "Clock Hr" setting
appears.
4
Adjust the hour.
8
Exit
The last selected item appears.
5
Select "Clock Min."
6
Adjust the minute.
7
Select "24H/12H."
8
Select "24Hours" or "12Hours."
9
To check the current clock time
when the unit is turned off...
To change the voice support system
You can select either "Beep" or "Voice" for
the voice support system (VSS).
Furthermore, if you select "Voice," you can
select the language—English, Spanish, or
French.
To change them, see pages 30 and 31.