Assembly; Tools - SQlab 702 Mode D'emploi

Assembly

To mount the grips, you will need a clean cloth, cleaning products (brake cleaner), a suitable hex key for clamping the grips, brake and
shift levers and a torque wrench.
The grips are labelled with the size and „L" (left) or „R" (right) on the bottom.
SQlab 702 – size and side specification
SQlab 7OX – size and side specification

Tools

Product
SQlab 702
SQlab 710
SQlab 710 short
SQlab STUBY
SQlab STUBY short
SQlab 7OX
SQlab 711R
SQlab 711/711 ltd. RUH
SQlab 711 2.0
SQlab 710 –size and side specification
SQlab 711 (2.0) – size and side specification
hex key size
5
5
left: 5, right: 3
4
4
3
-
3
3
tightening torque (Nm)
5
5
left: 5, right: 3
7
7
3
-
3
3
SQlab STUBY – size and side specification
Warnung
Incorrectly assembled components
pose a significant risk.
• You must read and understand the
instructions and notes before you
begin the assem bly.
• If you have questions about moun-
ting these components, contact your
SQlab deal er or have your grips as-
sembled by an experienced bicycle
mechanic.