Assembly Compatibility And Operational Safety; Sizing - SQlab 702 Mode D'emploi

Model designation
SQlab 702
SQlab 710
SQlab 710 short
SQlab STUBY
SQlab STUBY short
SQlab 7OX
SQlab 711R
SQlab 711 / SQlab 711 ltd. RUH
SQLAB 711 2.0
Assembly compatibility
and operational safety
The SQlab grips are designed for mount ing
on standard bicycle handlebars, with a grip
clamping diameter of 22.2 mm.

Sizing

The SQlab grips 702, 710, 710 short, STU-
BY, STUBY short, 7OX, 711R, 711 (2.0) and
711 R are available in 2,3 or 4 different
sizes, which can be determined by your
finger length. The sizes differ in diameter,
length and shape.
The grip width is the measurement from
the tip of the middle finger to the crook of
the thumb. This is precisely what you grasp
the grip with.
You can easily download the grip template
shown in the figure in the „Ergonomics"
section of our website under „Grip width
determination".
https://www.sq- lab.com/out/pictures/
ddmedia/sqlab_griffweitenschablo-
ne_2019_DD.pdf
Release Pedelec25
Yes
Yes
Yes
Yes
Yes
Yes
No
Ja
Ja
Warning
The manufacturing tolerances of the
grips and the handlebars can lead
to the grips not being sufficiently se-
cured against twisting and becoming
pulled off. In case of problems, please
contact your SQlab dealer.
Release Pedelec45
Yes
Yes
Yes
No
No
Yes
No
Ja
Ja
Warning
Always follow the instructions and
warnings given in the assembly and
operating instructions for your han-
dlebars.