Amann Girrbach artex bn Mode D'emploi page 6

U S e R M a n U a l
aRteX
open centRIc
gB
Swivel ! locking bar upwards with the thumb;
the top part of the Artex can be guided back-
wards freely. The locking bar limits travel in a
posterior direction and prevents the top part of
the Artex falling out.
Centric open @ , condyle ball released.
cloSe centRIc
Press locking # bar down; the plastic tongue
centres the condyle ball in the lowest position of
the condyle path. Only rotation is possible with
the top part.
Centric closed $ : the condyle ball is fixed in
position by the plastic tongue.
ZeRo poSItIon of IncISal
gUIdance accoRdIng to the
BonwIll tRIangle
The standard incisal guidance positioner 0 ° has
a marking with two lines. When the point of the
incisal guidance pin is placed centrally between
the two lines, incisal guidance with the incisal pin
is positioned according to the 110 mm Bonwill
triangle (formed from the point of the incisal pin
and the central points of the joint balls = inter-
condylar distance).
6
Bn
®
Model plateS, MagnetIc
Model plates easily and quickly removable.
Scope of delivery:
Order No.:
217360 Artex BN
accessories/components:
Order No.:
217330 Base Plates blue, pair
217331 Base Plates blue, 50/Pkg.
215250 Retention Disk