Panasonic AW-PH360L Mode D'emploi page 48

Specifications
w Connectors
Input connectors:
DC 12 V IN (terminal block), G/L IN (BNC), SDI IN (BNC),
CAMERA CONTROL IN (BNC)
Output connectors:
VIDEO OUT (BNC), SDI OUT (BNC), Y OUT (BNC), Pr OUT (BNC),
Pb OUT (BNC), OP (terminal block)
Input/Output connectors:
CAMERA I/F (29-pin square connector), LENS I/F (12-pin round connector),
ND/EXT (6-pin round connector), CONTROL IN IP/RP (RJ-45),
CONTROL IN RS-232C (28-pin square connector), 1394,
LAMP CONTROL C, S (terminal block)
w Functions/performance
Tilt range:
190 degrees (approx. ±95 degrees) or more
K Tilt range may be subject to restrictions depending on the mounted camera
cable, lens, etc.
Panning range:
300 degrees (approx. ±150 degrees) or more
Maximum operating speed:
30 degrees/sec. for panning, 25 degrees/sec. for tilting
Repeatability:
Less than ±3´
Noise level:
Less than NC30
w Optional accessories
Pan-tilt Cable:
AW-CA15H29
Cable Kit:
AW-CAK4H1
Mass (weight) and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
- 47 (E) -