Publicité
Les langues disponibles
Les langues disponibles
Installation
When installing onto a major structural component
(concrete with a thickness of 120 mm or more)
10 mm
For installing the pan-tilt head:
[Anchor with an external thread] Fig. 1
At least 2 times the
bolt diameter
10 mm
[Anchor with an internal thread] Fig. 2
(Be sure to ask your dealer to install the unit.)
• M6 nuts
• Spring washers
• Flat washers
For installing the pan-tilt head:
• M6 bolts
• Spring washers
• Flat washers
- 24 (E) -
Installation work
1.6 mm
7 mm or more
Drop prevention measures
For installing the underneath support plate:
• M8 nut
• Spring washer
• Flat washer
1.6 mm
Drop prevention measures
For installing the underneath support plate:
• M8 bolt
• Spring washer
• Flat washer
Publicité
