Publicité
Les langues disponibles
Les langues disponibles
Blade replacement
The power supply of the trimmers must be disconnected before operation.
When the upper blade and the lower blade do not coincide well, or the blade is still not
cut clean after grinding, it is recommended to replace the blade. The operation steps are
as follows:
1. To ensure safety, power o and remove the battery before replacement.
2. Change the blade step by step according to the following gure.
3. After the replacement, clean, connect the battery, power on the detection and close
the blade.
1
5
5
5
9
The xed and movable blades can be replaced separately, you don't need to worry about
the blade opening size when replacing, it will automatically return to the normal opening
size after power on.
2
6 5
6
6 5
10
3
7 6 5
7
6 5
11
4
8 6 5
8
6 5
12
12
33
Publicité
