Active TIGERCUT 25 wireless Manuel D'utilisation Et D'entretien page 56

Product description
This product is an extension pole for a battery-powered electric pruner. It is used in the
height range of 0-5 meters, signi cantly increasing the range of use and safety during
cutting.
Technical speci cations
Model
Tube material
Contracted measure
Extended measure
Weight
Installation steps for the use of extension pole
1
5
After completing the installation, turn on the power, pull the trigger twice,
and follow the normal start operation of the shears.
When installing or dismantling shears, be sure to cut o the power rst.
Basic informations
EXTENSION POLE FOR TIGERCUT 35
ALUMINUM
170 cm
240 cm
1.400 g
2
6
52
3
7
EN
4
8