Publicité
Les langues disponibles
Les langues disponibles
ULTRAFLEX
3.6 Installation of the user interface
1 Position the user interface so that it does not hinder other controls or that it is not hindered by them.
2
Refer to the overall dimensions indicated in paragraph 1.7 to make sure the interface can be installed
in the chosen position.
3 After choosing the right position, make the holes to
insert the user interface with the suitable template.
4 Before fixing the system to the dashboard, connect
connector (1) from the power unit in case of single
station and connector from the "y" cable in case of
dual station.
5 Position the user interface (2) and fix it
to dashboard (3) by means of the four
threaded pins (4) washers (4) and nuts
(5) with a maximum torque of 2Nm (1,47
lb ft).
Installation, Maintenance and Owner's Manual
3
5
6
POWER ASSISTED STEERING SYSTEM
1
4
2
page 31
-
of 143
Publicité
