Publicité
Les langues disponibles
Les langues disponibles
ULTRAFLEX
3.2Necessary tools
MOLYKOTE® 1000
Torque
wrench
Open end
Open end
wrench
wrench
13mm
11/16"
3.3 Installation of the front mount helm
1
Select a suitable place for the steering station.
Make sure that there is enough manoeuvering
space for the steering wheel and for the helm and
its pipes and fittings.
WARNING
In order to fix the helm properly, the maximum
dashboard thickness must be 25 mm [1"].
Different thicknesses could compromise the driving
safety.
Make sure that the fixing screws pass through the
supplied self-locking nuts completely.
2
By using the proper template supplied with this manual, make
the holes (1) for installation in the suitable position on the
dashboard.
page 22
of 143-
POWER ASSISTED STEERING SYSTEM
Drill
Drill bit
Drill bit
Ø 5 / 0,2"
Ø 6,5 / 0,25"
Open end
Open end
wrench
wrench
15/16"
17 mm
Installation, Maintenance and Owner's Manual
Hole saw
Hole saw
Ø 75 / 3"
Ø 50 / 2"
Phillips
Screwdriver
screwdriver
max. dashboard thickness
25 mm [1"]
1
Open end
Open end
wrench
wrench
10 mm
7mm
Allen wrench
5mm
250 mm [10"]
Publicité
