Publicité
Les langues disponibles
Les langues disponibles
12. Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work-
shop.
Fault
Possible cause
Machine does not
• Supply voltage not on
start
• On/Off switch faulty
• Worn carbon brushes
• Motor faulty
• Power cable damaged
Machine works with
• Power cable damaged
interruptions
• Internal connections are loose
• On/Off switch faulty
Poor cutting quality
• Blades are blunt.
Motor is running but
• The power unit is jammed by a thick
the gears are not
branch or other objects.
engaging
28 | GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Remedy
• Check the socket or the electricity supply; if re-
quired, arrange repair by an authorised electrician.
• Contact the service centre
• Contact the service centre
• Contact the service centre
• Check the extension lead and have it replaced, if
required.
• Check the extension lead and have it replaced, if
required.
• Contact the service centre
• Contact the service centre
• Have the blades sharpened or the knife bar re-
placed.
• Turn the hedge trimmer off immediately, disconnect
the electricity supply and remove the blockage.
Publicité
