Klarstein 10029239 Mode D'emploi page 28

Setting the timer to turn one cooking zone off
1. Touching the heating zone selection control.
2. Touch timer control , The minder indicator will start flashing and "30" will show in the timer display.
3. Set the time by touching the „+/-" control of the timer. Hint: Touch the „+/-" control of the timer once to
decrease or increase by 1 minute. Hold the „+/-" control of the timer to decrease or increase by 10 minutes.
Scrolling the „-" to the "00",the timer is cancelled.
4. When the time is set, it will begin to count down immediately. The display will show the
remaining time and the timer indicator flash for 5 seconds. The red dot next to power
level indicator will illuminate indicating that zone is selected (see picture).
5. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
NOTE: If you want to change the time after the timer is set, you have to start from step 1. Other cooking zone
will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set the time for several cooking zones si-
multaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min.
timer. The dot of the corresponding zone flashes.
2. Once the countdown timer expires, the corres-
ponding zone will switch off. Then it will show the
new min. timer and the dot of corresponding zone
will flash.
Note:
Select the heating zone, then touch the Timer control to cancel the timer.
28