Klarstein 10029239 Mode D'emploi page 21

Locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply toce onto the controls
protruding from the hob. Fix the hob on the work surface by screw four brackets on the bottom of hob (see
picture) after installation.
A B C D
Screw Bracket Screw hole Base
Adjust the bracket position to suit for different work surface' s thickness
Important Hints
• The ceramic cooker hob must be installed by qualified personnel or technicians.
• The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
• The ceramic cooker hob shall be installed such that better heat radiation can be ensured to enhance its reliability.
• The wall and induced heating zone above the work surface shall withstand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
• A steam cleaner is not to be used.
21