Installation - Klarstein 10029239 Mode D'emploi

Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use,
a minimum of 50mm space shall be preserved around the hole. Be sure the thickness of the work surface is at
least 30mm. Please select heat-resistant work surface material to avoid larger deformation caused by the heat
radiation from the hotplate. As shown below:
Dimensions and Spaces (both items)
L (mm) W (mm)
590 520
A (mm)
760

Installation

H (mm) D (mm)
52
B (mm) C (mm)
50 (mind.) 20 (mini)
A (mm)
47 560
Under any circumstances, make sure
the ceramic cooker hob is well ven-
tilated and the air inlet and outlet
are not blocked. Ensure the ceramic
cooker hob is in good work state. As
shown below
Note: The safety distance between the
hotplate and the cupboard above the
hotplate should be at least 760 mm.
D
Air intake
B (mm) X (mm)
490 50
E
Air exit 5 mm
20