Led Indicators - Sony HT-CT290 Mode D'emploi

LED indicators

You can turn on or off the LED indicators by holding down BACK for 5 seconds.
When you turn on this feature, the LED indicators light up or flash depending on the
function selected or system status.
If you turn off the LED indicators, only BLUETOOTH indicator (blue) lights up in "BT"
function.
Function/Status
Input (page 12)
• TV
• BT
• USB
USB input (page 12)
• Reading
• Unsupported USB device
Sound effect (page 14)
• MOVIE
• MUSIC
CLEAR AUDIO+ (page 14)
Volume maximum/minimum,
Subwoofer volume
maximum/minimum (page 16)
Volume up/down,
Subwoofer volume up/down
Muting
Dual Mono (page 15)
• Main
• Sub
• Main/Sub
Dolby DRC (page 15),
Attenuation (page 15)
• On
• Off
Night Mode (page 14),
Clear Voice (page 15)
• On
• Off
PLAY MODE (page 13)
Control for HDMI (page 18),
BLUETOOTH Standby
(page 17),
Auto standby (page 20)
• On
• Off
Secure Link (page 20)
• On
• Off
28
US
Indication
TV indicator lights up
BT and BLUETOOTH indicator (blue) lights up
USB indicator lights up
USB indicator flashes continuously
USB indicator flashes two times continuously
MOVIE indicator lights up
MUSIC indicator lights up
MOVIE and MUSIC indicators light up for 2 seconds, then light off
USB, TV and BT indicators flash three times
Current input indicator flashes one time
USB, TV and BT indicators flash continuously
MOVIE and MUSIC indicators flash two times
MOVIE indicator flashes two times
MUSIC indicator flashes two times
USB and TV indicators flash two times
USB indicator flashes two times
MOVIE and MUSIC indicators flash two times
MOVIE indicator flashes two times
USB indicator flashes three times
USB and TV indicators flash two times
USB indicator flashes two times
USB and TV indicators flash two times, then MOVIE and MUSIC
indicators flash alternately until connection is established
USB indicator flashes two times