Sony HT-CT290 Mode D'emploi page 13

Note
• To view the USB content list on the TV
screen, make sure you connect the
system to the TV using HDMI cable.
• Change the input of the TV to the input
which the Bar Speaker is connected.
1
Connect the USB device to the
(USB) port.
Refer to the operating instructions
of the USB device before
connecting.
The USB indicator flashes
continuously when reading the USB
device.
2
Press INPUT repeatedly to select
"USB".
The USB content list appears on the
TV screen.
3
Press / to select the content
you want, then press ENTER.
The selected content starts playing.
4
Press PLAY MODE repeatedly to
select the play mode you want.
• None: Plays back all tracks.
• (Repeat One): Repeats one
track.
• (Repeat Folder): Repeats all
tracks in a folder.
• (Random): Repeats all tracks in
a folder in random order.
• (Repeat All): Repeats all
tracks.
The USB indicator flashes three
times each time you press PLAY
MODE.
5
Adjust the volume.
• Press  +/– to adjust the Bar
Speaker volume.
• Press SW  +/– to adjust the
subwoofer volume.
Other operations
To
Stop playback or return
to previous display
Pause or resume
playback
Select the previous
or next track
Search backward or
forward (rewind/
fast forward)
Note
• Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn off the
system before removing the USB device.
• The USB indicator flashes twice
continuously if you connect an
unsupported USB device.
Do this
Press BACK
Press 
Press /
Hold down
/
13
US