Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.1 Start, basic functions
1. To start the "NUK Multi" app, tap
the corresponding symbol on
your smartphone.
2. A list of registered cameras will appear.
Note: depending on configuration, the
list of cameras may be skipped and the
start screen will appear immediately.
3. Select the camera by tapping on the
name.
The start screen appears.
Buttons for the basic functions will
appear next to the image of the camera.
• You can tell whether a function
is active by the fact that the
corresponding button is shown
darker.
• If the button looks lighter, the
corresponding function is not
active.
7.1.1 Talking to your child
1. tap the TALK button to talk via
the camera.
7. Using the app
– The icon switches:
– This function is only possible with an
– If you have muted the baby monitor,
2. Speak into the smartphone microphone.
– Your voice can now be heard in the
– You should have set the volume
3. Switch the Talk function back
off by tapping the TALK button
again.
The icon switches back again.
7.1.2 Taking a photo
Tap the SNAP SHOT button to
take a photo of the image
currently being displayed.
The photo is stored in the internal
memory of the smartphone in the form
"xxx.jpg".
You can view saved pictures using e.g.
"Gallery" or "Photo Album" functions of the
smartphone.
7.1.3 Recording video
1. Tap the RECORD button to
record a video of the image
currently being displayed.d.
30
internal WLAN (Wi-Fi) connection. The
data rate is not adequate with an
internet connection, so the icon does
not appear in the menu.
this is cancelled for the duration of this
function so that you can hear any
responses from your child.
nursery.
correctly
beforehand
"7.1.6 Adjusting volume" on page 31).
(see
Publicité
Chapitres
Table des Matières
