Connecting The Baby Monitor To Your Wlan Router; Making The Connection Wirelessly - NUK Smart Control Multi 310 Mode D'emploi

– Special case: a list of cameras and
"zero" next to UID appear instead of
the camera image.
This means that transfer of camera data
to the smartphone is not working. You
then need to register the camera to the
smartphone manually.
described in
camera to the smartphone using a QR
code" on page 27 .
5.4 Connecting the baby
monitor to your WLAN
router
1. Tap the green SETTING button.
2. Enter the password "12345678" for the
camera.
3. Confirm entry of the password with OK.
– A pop-up menu opens.
Proceed
"6.1.1 Registering
4. Select Join Home AP.
The WLAN (Wi-Fi) networks in your
vicinity now appear.
5. Select your router.
A pop-up menu appears.
6. Enter the password for your WLAN (Wi-
as
Fi) router. The password is generally on a
the
label on the router.
Note: the baby monitor/WLAN router
connection generally only works if the
password
exclusively of letters and numbers. If the
router password contains other symbols,
such as "#$%^&" for example, you need
to change it to a combination of letters
and numbers beforehand.
7. Tap Connect.
The message that the camera has now
been registered to your router appears.
8. Slide Link/pairing selector switch 15 to
LINK.
– Indicator LED 13 lights red. The camera
is initialized. It takes a few minutes for
the camera to be set completely.
9. Wait until indicator LED 13 lights green.
10.Tap OK.
5.5 Making the connection
wirelessly
Once the camera is correctly registered to
the smartphone, the "NUK Multi" app will
automatically
convenient connection.
If the smartphone is located within range of
your WLAN (Wi-Fi) router to which it has
been registered, this connection will be
selected.
26
for the router
search for the
consists
most