More Settings - NUK Smart Control Multi 310 Mode D'emploi

– The music is played at the volume you
have previously
"7.1.6 Adjusting volume" on page 31).
2. To stop playback or to select a
different track, tap the SEND
MUSIC button again.
The list of MP3 files stored on
your smartphone will be loaded again.
3. Select Stop MP3 file to stop playback.
7.1.9 Returning to the previous
menu
Return to the previous
menu by tapping the
BACK button.
7.1.10 Adjusting camera orientation
Tap the button for adjusting the
orientation of the camera:
– Four arrow buttons appear in
the image sent by the baby
monitor which you can use to control
the orientation of the camera.
7.1.11 Use in the dark
The baby monitor has a built-in light sensor.
As soon as it gets too dark for the camera in
the nursery, the
automatically switch on to illuminate an area
of about 2 metres around the camera.
The image is then black and white, not
colour any more.
During the transitional phase, when it is just
too dark for the normal camera and the
infra-red LEDs 4 are coming on, the image
from the baby monitor may flicker a bit. As
soon as it gets a bit darker, the flickering will
stop by itself.

7.2 More settings

Note: in the case of a connection via the
internet (wireless), only the "Set message"
menu item is available.
1. To open the menu for more
settings, tap the SETTING
button.
set (see
infra-red LEDs 4
The input field for the baby monitor
password appears.
2. Enter the password (default 12345678)
and confirm with OK.
3. The "More settings" menu appears.
7.2.1 Changing name and password
The "Wi-Fi Setting" menu is not available via
the internet.
Here you can change the name and
password of the baby monitor.
If you use several baby monitors, each of
them needs to have a different name. The
default is "NUK Smart Control Multi 310".
Following installation of the baby monitor,
you should
immediately
unauthorized access to the baby monitor.
1. To change the name of the baby monitor,
tap on the existing name.
– Enter the new name and tap OK to
confirm.
Note: the new password must consist of
exactly 8 characters. Only letters and
numbers are permitted.
2. To change the password, enter the
password twice and confirm the entry
with OK.
32
change the password
in order to prevent