Default Settings; Full Eco Mode; Switching Full Eco Mode On/Off - NUK Eco Control Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 52
6.1

DEFAULT SETTINGS

The default settings of the baby monitor are the following:
Menu options
LANGUAGE
LULLABY
SENSITIVITY
TEMPERATURE
TEMPERATURE
TEMPERATURE
TEMPERATURE
VIBRATION
ALERT
ALERT
BRIGHTNESS
ECO MODE
(1)
volume
(1)
This parameter shall be set on the parent unit directly (chapt. 7.1.2). All other parameters
are set on the parent unit using the on-screen menu (chapt. 7.1.1)
6.2

FULL ECO MODE

The baby monitor provides Full Eco Mode which guarantees safe and efficient supervision on
the lowest high-frequency radiation possible. The baby monitor transmits video and audio data
when the microphone picks up a sound, otherwise it goes into sleep mode. In sleep mode the
baby monitor is 100% free from high-frequency radiation.
As soon as the baby unit detects a sound that exceeds the set sensitivity level, the baby unit is
switched on and establishes a connection to the parent unit. This may take a few seconds. Both
video and audio data are now transmitted. A few seconds after the sounds near the baby unit
stop, the message 'ECO MODE ACTIVATED' appears and the baby monitor returns to sleep
mode. The screen goes black again.
The connection indicator light flashes rapidly to indicate that there is no connection once
Note
the baby monitor goes into sleep mode. In this case, this is not a warning, but a
confirmation that the baby monitor is in Full Eco Mode.
In Full Eco Mode sound and video data is transmitted according to the set sensitivity level. If
volume is switched off (chapt. 7.1.2) you will hear no sound.
Check the range of your baby monitor before you use Full Eco Mode. Make sure you are
within range.
21
6.2.1

Switching Full Eco Mode On/Off

1. press the M button at the parent unit to open the menu
2. use the
3. press the M button
4. use the
5. press the M button to confirm your choice
6. press the
For further information to the parent unit's on-screen menu see chapt. 7.1.1.
LOW BATTERY
NO LINK ALERT
or
buttons to scroll to ECO MODE
or
buttons to set the function ON or OFF
button to close the menu
Items
FORMAT
ALERT
Low
High
42
Parent unit
Baby unit
GERMAN
LULLABY 1
LULLABY 1
LEVEL 3
CELSIUS
OFF
14°C (57°F)
30°C (86°F)
OFF
ON
OFF
LEVEL 4
OFF
LEVEL 4
-
-
-
-
-
-
-
-
-
-
-
LEVEL 3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10.256.296

Table des Matières