NUK Eco Control Mode D'emploi page 49

Problem
Cannot hear sound
or baby cry.
Parent unit is too
sensitive to room
sounds.
Parent unit cannot
vibrate.
Baby monitor
produces a high-
pitched noise.
Alkaline batteries in
baby unit are
running low
quickly.
Rechargeable
battery in parent
unit is running low
quickly.
Talkback is not
working.
Possible cause
Volume of parent unit is too low.
Sensitivity of baby unit is too low.
Parent unit and baby unit are out
of range with each other.
Mains adapters or mains cables
are defective or batteries are
drained.
Sensitivity of baby unit is too
high.
Vibration is switched off.
Volume of parent unit is not
switched off.
Baby's voice is not exceeding
sensitivity set on parent unit.
Mains adapters or mains cables
are defective or batteries are
drained.
Parent unit and baby unit are too
close to each other.
Volume of parent unit is too high.
Sensitivity of baby unit is too high
which causes baby unit to
transmit more often.
Volume level of baby unit is too
high.
Volume of the parent unit is set
high which consumes power.
Battery in parent unit is drained or
damaged.
Baby unit is switched off.
Lost connection with baby unit.
Volume of baby unit is too low.
Mains adapters or mains cables
are defective or batteries are
drained.
Solution
Increase volume of parent unit (chapt.
7.1.2).
Increase sensitivity of baby unit (chapt.
7.1.1).
Reduce distance between units (chapt.
3.2.1).
Replace with original parts. Ask your
retailer (chapt. 8.3).
Decrease sensitivity of baby unit
(chapt. 7.1.1).
Switch vibration on (chapt. 7.1.1).
Switch off volume of parent unit (chapt.
7.1.2).
Increase sensitivity of baby unit (chapt.
7.1.1).
Replace with original parts. Ask your
retailer (chapt. 8.3).
Widen distance between units (chapt.
3.2.1).
Decrease volume of parent unit (chapt.
7.1.2).
Decrease sensitivity of baby unit
(chapt. 7.1.1) or use mains (chapt.
3.2.1).
Decrease volume of baby unit (chapt.
7.2.1) to save power when playing
lullabies or using talkback.
Decrease volume of parent unit (chapt.
7.1.2) or use mains (chapt. 3.1.1).
Replace with original parts. Ask your
retailer (chapt. 8.3).
Press the
(chapt. 1.4).
Reduce distance between units (chapt.
3.2.1).
Increase volume of baby unit (chapt.
7.2.1).
Replace with original parts. Ask your
retailer (chapt. 8.3).
49
button to switch it on