Alert; Brightness; Full Eco Mode; Volume - NUK Eco Control Mode D'emploi

1. press the M button to open the menu
2. scroll to VIBRATION
3. set vibration ON or OFF
When you have set on the vibration function, it is activated once as a confirmation.
If the volume on the parent unit is turned on, the vibration function is automatically not
Note
active.

Alert

With the on-screen menu you can set an alarm as a warning that the batteries in the baby unit
are low or that the connection between the baby unit and the parent unit has been lost.
1. press the M button to open the menu
2. scroll to ALERT
3. select LOW BATTERY or NO LINK ALERT
4. set the relevant alarm ON or OFF
The alarm sounds even if the volume has been set to off. There are specifics in Full Eco
Note
Mode for NO LINK ALERT (chapt. 6.2.3).

Brightness

With the on-screen menu you can set the brightness of the video as follows:
press the M button to open the menu
1.
2. scroll to BRIGHTNESS
3. select and confirm your desired brightness
A low brightness consumes less power.
Note

Full Eco Mode

With the on-screen menu you can set Full Eco Mode on or off:
1. press the M button to open the menu
2. scroll to ECO MODE
3. set the function ON or OFF
Full Eco Mode is described in chapt. 6.2 in full detail.
7.1.2

Volume

The settings of the volume define the loudness of played sounds. The volume is increased by
repeatedly pressing the
maximum or minimum value is reached, 3 short beeps will be heard.
If the screen of the parent unit is switched on, the volume level is shown in the middle of the top
line (chapt. 1.3.1):
= max volume,
If you have switched off the volume, the speaker indicator
1.3). This gives you an indication that you have turned off the volume, even if the video is
switched off.
button, decreased by repeatedly pressing the
VOL
= min volume, = volume off (you can hear no sound)
lights up on the parent unit (chapt.
45
button. When the
VOL