Starting Up The Baby Monitor - Default; Preparing The Smartphone/Tablet; Connecting The Camera; Connecting Smartphone/Tablet And Camera - NUK Smart Control Multi 310 Mode D'emploi

5. Starting up the baby monitor - default

We have tried to make it as easy as possible
to set up the baby monitor. In this section,
you will find a description of the default
installation as
smartphones, tablets, operating systems
and WLAN (Wi-Fi) routers.
However, as there are a great many different
devices on the market, it is possible that the
default installation may not always work as
described in this section.
In these cases there are special solutions
which are described in "6. Starting up the
baby monitor - special cases" on page 27 .
5.1 Preparing the
smartphone/tablet
1. Download the free "NUK Multi" app from
"Google PlayStore".
2. Install the app on your smartphone or
tablet.

5.2 Connecting the camera

1. Plug the connector on the end of the
cable for the mains adapter supplied into
connecting socket 17.
2. Plug the mains adapter into a socket
which complies with the technical data
(see "10. Technical data" on page 35).
5.3 Connecting smartphone/
tablet and camera
1. Slide Link/pairing selector switch 15 to
Pairing.
2. Tap on/off sensor button 8 to
switch on the camera.
– Display LED/night light 7 lights
up 3x.
– Indicator LED 13 lights red. The camera
is initializing. It takes a few minutes for
the camera to be set completely.
it works with
– As soon as indicator LED 13 is flashing
green, the camera is ready.
– The camera now works like a WLAN
most
access point and is directly accessible
via your tablet or smartphone.
3. On your tablet or smartphone, select the
"NUK Smart Control Multi 310" camera
as the WLAN (Wi-Fi) router.
– You can change this in the settings
menu for WLAN connections.
Note: That when user walks out of range
with smartphone, the phone will auto-
switch to 3G and the connection to the
camera will be lost (see "5.5 Making the
connection wirelessly" on page 26).
4. Enter "12345678" as the password.
5. Tap OK.
– The IP number of the camera is
automatically
smartphone.
– The successful connection is displayed
on your smartphone.
6. When you are connected to the camera,
start the "NUK Multi" app.
– You will now get an image of the
camera on your display.
– Continue with "5.4 Connecting the
baby monitor to your WLAN router" on
page 26 .
25
transmitted to the