Starting Up The Baby Monitor - Special Cases; Registering The Baby Monitor To The Smartphone Manually - NUK Smart Control Multi 310 Mode D'emploi

If you are not within range of your WLAN
(Wi-Fi) router and are registered to a WLAN
(Wi-Fi) access point, this connection will be
selected.
If no Wi-Fi network is available, the app will
use the wireless network to connect to the
camera. Your smartphone must be able to
connect to the wireless network quickly
enough for this to be possible (3G/UMTS
required as a minimum). Please note here
that transmission quality may be restricted

6. Starting up the baby monitor - special cases

6.1 Registering the baby
monitor to the
smartphone manually
There are 2 instances in which you will have
to register the baby monitor to the
smartphone manually.
• When registering the first baby monitor,
the camera data was not transmitted to
the smartphone automatically. This may
happen with
smartphones. You will be able to tell this
has happened because no UID will be
entered for the camera:
In this case, proceed as described in
"6.1.1 Registering the camera to the
smartphone using a QR code" on
page 27 .
• You want to register a second baby
monitor to your router or smartphone.
This case is described in "6.2 Registering
another camera to the smartphone" on
page 28 .
some routers
and you may incur costs from your provider
if you do not have a sufficient flat rate.
Note: as the data rate which can be
transmitted over an internet connection is
limited, you should reduce image data to the
smallest possible format (see "7.2.3 Camera
settings" on page 33). If the bandwidth of the
wireless network is inadequate, it is possible
that only sound and not video will be
transmitted.
6.1.1 Registering the camera to the
smartphone using a QR code
1. If no UID is entered for the camera,
or
tap the button for camera data.
The input menu appears:
2. Select "Scan QR code".
The QR code reader appears.
3. Hold the camera of your smartphone up
against the QR code on the bottom of the
baby monitor:
– the QR code should be well-lit;
– the focussing beam of the smartphone
should hit the bottom of the baby
27
i