Using The Main Menu; Screen Brightness - NUK Eco Control Video Display 550VD Mode D'emploi

Notes:
• If the baby unit 1 is in Eco-Mode and the
parent unit moves out of range, the
connection indicator 20 will light up red.
You will also hear a beep every 30
seconds.
A red warning symbol will appear
on the screen.
• As soon as the parent unit 17 comes
back into range and the reason for the
interrupted connection is eliminated, the
connection indicator 20 lights up green
and the units are able to communicate
again.
Noise level indicators 22
The noise level indicators 22 above the
screen, consisting of four green LEDs and
one red LED, indicate the level of sound in
baby's room. They
according to the set VOX level (sensitivity).
The more LEDs light up, the louder the
sounds in baby's room.
Attention! The noise level indicators are
switched off while the lullabies are playing,
because the device cannot distinguish
between the lullabies and baby sounds. You
will also be able to hear any sounds baby
makes in the background while the lullabies
are playing (see
page 67).

6.3 Using the main menu

The main menu at the bottom of the screen
allows you to switch the available functions
on or off or change settings:
1. The main menu appears when you press
the button
2. Use the 24 or
a menu item.
The selected menu item will be shown in
red.
3. Press the button 26 again to open the
menu item and view the possible settings
or submenus.
react differently,
"6.11 Lullabies"
26.
27 button to select
4. Use the
setting or a submenu item.
The selected item is marked with a
green asterisk.
5. Press the
the setting you have selected or open the
selected submenu.
6. You can press the
the current submenu and return to the
previous submenu.
7. To close the opened menu:
– wait 15 seconds without pressing any
buttons, or
– confirm a setting you have selected by
pressing the button
– select the EXIT option in the main
menu and confirm this by pressing the
button 26.

6.4 Screen brightness

You can adjust the screen brightness and
the brightness of the video to suit the
prevailing light conditions. In very light
conditions, you should set a higher screen
brightness to improve visibility. In low light,
you might feel uncomfortable with too bright
a screen. Adjust the screen brightness lower
in this case.
1. Press the
on
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the
select the Brightness menu.
The selected symbol will be shown in red.
3. Press the
submenu.
4. Use the
the brightness you require.
The more bars you can see, the higher
the screen brightness. You have a choice
of 5 levels.
5. Press the
setting.
56
25 or 28 button to select a
button 26 to confirm
button 27 to exit
, or
button 26.
24 or 27 button to
button 26 to view the
25 or 28 button to select
button 26 to confirm your