Overview Of Parent Unit Indicators; Overview Of Status Bar Indicators - NUK Eco Control Video Display 550VD Mode D'emploi

3.2 Overview of parent unit indicators

Light
Connection
indicator 20
Power-LED 21
Indicator
LEDs 22

3.3 Overview of status bar indicators

Symbol
Display
green
green blinking
red blinking
1 beep every 30 s
green
red
1 beep every 60 s
green blinking
1 - 5 LEDs
Status line at top of screen
Received signal strength.
The more bars you can see, the better the connection between the
parent unit and the baby unit is. If the symbol is flashing and only
shows one bar, this indicates a bad connection.
Device is in Eco-Mode and baby is asleep. The screen shows no video
transmission.
Active camera.
Device is in patrol mode
Nightlight is on.
Nightlight is on with activated timer. When the set time has elapsed, the
symbol will automatically disappear and the nightlight of the baby unit
will switch off.
Reminder function is active. A few minutes before the set time has
elapsed, the symbol will start to flash. If this alarm is not
acknowledged, a new message will appear in the middle of the screen
when the time has elapsed. You will also hear a beep.
Parent unit is connected to mains power, but no battery is inserted.
Parent unit
Link ok (non Eco-Mode)
Link ok (Eco-Mode)
Link not ok
The parent unit is switched on and the
battery is fully charged
Low battery warning.
The parent unit will switch off
automatically within a very short time.
Charge battery indicator
Visual baby sound indication. The more
LEDs are lit, the higher is the noise level
in the nursery.
Significance
47
Meaning