Technical Data - NUK Eco Control Video Display 550VD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 192
Fault
Parent unit is
beeping
Connection
indicator 20 has
lit up red
No sound from
the parent unit
If these hints do not solve the problem you
can try to clear the fault as follows:
1. Take the battery out of the parent unit.
2. Unplug the mains adapters from their
power sockets.
Wireless connection
Transmission frequency
Number of channels
Line of sight range
Range within enclosed rooms about 40 m. Successful transmission depends on the environment.
Operating temperature
Operating temperature
Battery
Manufacturers name
Model
Input voltage
Input AC frequency
Output voltage
Cause
Connection to the baby unit has
been lost
Problem with the power supply
The parent unit is out of range
Volume is muted
VOX function is set too low

9. Technical data

2.4 GHz FHSS
2405 - 2475 MHz, max EIRP 100mW
32 / automatic channel selection
about 250 m
Walls or trees can seriously interfere with reception.
0 °C to 40 °C ambient temperature
0 °C to 40 °C ambient temperature
Lithium polymer battery (rechargeable), , 3.7 V, 1260 mAh
Period of operation in normal transmission mode: at least 8 hours
Period of operation in Eco-Mode: > 8 hours
Charging time when battery is charged for the first time: at least 10
hours,
on subsequent occasions, charging takes about 6 hours
Chou Sen Electronics (Shenzhen) Co.Ltd; 3rd Building No.129 of 1st
Industrial Area LiSongLang Community, Gongming Office Guangming
New District, Shenzhen City,Guangdong, China
CS3E060060FG (EU) CS3E060060FB (UK)
100 – 240 V AC
50 – 60 Hz
6 V
Set up the connection (see
"4.3 Connecting baby unit and parent
unit" on page 51)
Check the power supply (see
"4.4 Power supply" on page 51)
Set up the connection (see
"4.3 Connecting baby unit and parent
unit" on page 51)
Increase the volume (see "6.14 Mute
function" on page 71)
Increase the transmission sensitivity
(see "6.8 Setting the VOX sensitivity
level" on page 62)
3. Wait a few minutes.
4. Replace the battery and plug the mains
adapters back in.
If this has not resolved your problem, please
contact one of our Service Centres (see
"11.2 Service Centres Babyphone" on page 76).
Baby unit
Parent unit
Mains adapters
74
Remedy

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10.256.44110.749.102

Table des Matières