Lullabies - NUK Eco Control Video Display 550VD Mode D'emploi

Press any key to silence the alarm and tem-
porarily deactivate it. However, the tempera-
ture alarm will continue to be signalled until
the temperature in the monitored room is
back within the set limits.
The current room temperature in the moni-
tored room is displayed in the status bar.
Notes:
• If you activate the temperature alarm
function without setting your own limits
first, the default limit values will be used,
i.e., MIN = < 15°C and MAX = > 30 °C.
• After 15 seconds without any input from
you, the menu will be closed with the
settings unchanged and the parent unit
will return directly to monitoring mode.
Deactivating the temperature alarm
Press any key to silence the alarm and tem-
porarily deactivate it. However, the tempera-
ture alarm will continue to be signalled until
the temperature in the monitored room is
back within the set limits.
The current room temperature in the moni-
tored room is displayed in the status bar.
To deactivate the temperature alarm, pro-
ceed as follows:
1. Follow steps 1 to 3 described above.
4. Use the 25 or
star in front of "ALARM".
5. Press the button 26 to view the next
submenu.
ON: The temperature alarm function will
be activated and you will be notified if the
temperature rises above or falls below
the set limits.
OFF: The temperature alarm is deacti-
vated. You will receive no notification if
the temperature in the monitored room
rises above or falls below the set limits.
6. Use the 25 or
star in front of "OFF".
7. Press the button 26 to confirm your
setting.
28 button to move the
28 button to move the
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
Note: After 15 seconds without any input
from you, the menu will be closed with the
settings unchanged and the parent unit will
return directly to monitoring mode.

6.11 Lullabies

This NUK baby monitor has four specially
composed lullabies and soothing natural
sounds. To calm your baby and lull it to
sleep, the lullabies can be activated from
the parent unit at any time without needing
to enter the monitored room. The lullabies
are then played over the loudspeaker 14 of
the baby unit.
Attention!
• We recommend keeping video monitor-
ing or audio monitoring on while the lulla-
bies are playing so that you can hear and
see baby's responses.
• If the parent unit is switched to audio
monitoring only, i.e., video monitoring
has been deactivated (see "6.9 Switching
between audio and video monitoring" on
page 63), you will not be able to switch
the parent unit to mute. This prevents you
from losing all contact with your baby
while using the baby monitor.
• Please note that activating the lullabies
will automatically deactivate Eco-Mode if
it is active (see "4.5 Eco-Mode and Full-
Eco-Control" on page 52) and could
wake your baby.
Notes:
• Alternatively, you can switch the lullabies
on and off from the baby unit itself (see
"5.4 Playing the lullabies" on page 54).
• The five LEDs 22 are switched off while
lullabies are playing, because the device
cannot distinguish between a baby
crying and a lullaby being played, You will
still be able to hear any sounds baby
makes over the lullabies.
67