Using The App - NUK Eco Smart Control 300 Mode D'emploi

7. Click on the field beside "Name".
8. Give the camera a name, e.g. "Nursery".
9. Complete the entry by clicking on
"Return".
The camera will now be connected.
When searching for the camera, the
following will appear in the display:
"Connecting...".
As soon as the connection is made, the
display will show "Online".
6.1 Starting the app and
viewing the live image
1. To start the NUK LiveCam app,
press the corresponding symbol
on your smartphone.
The start screen will appear.
If there is no camera connected yet, the
NUK camera will not appear in the list. In
this case, carry out the steps as
described in
smartphone/tablet" on page 26.

6. Using the app

"5.3 Preparing
10.To display the camera signals, press the
name of the required camera and the
camera
smartphone.
11.If the message "Unknown device" or
"Offline" appears, start the search again:
– Press the button
– Press "Connect again".
Another attempt will be made to make a
connection with the camera.
– Press "Back" if this was successful or
you wish to start the search again.
If the app has already transmitted a live
image from the camera, a snapshot will
appear on the left beside the name.
If the app has not transmitted any live
images from the camera, an empty field
will appear on the left beside the name.
If "Online" appears below the name of
the camera, the camera and smartphone
are connected with each other.
the
27
image will appear
.
on the