Connecting An External Loudspeaker - NUK Eco Smart Control 300 Mode D'emploi

Masquer les pouces Voir aussi pour Eco Smart Control 300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Separate the cameras and the Powerline
adapter for the first network from the
power supply.
2. Set up the second network, comprising
one or several cameras and a Powerline
adapter with the standard encryption
(see "5. Starting the device" on page 25).
3. Press and hold the button
on the underside of the
Powerline adapter 17 for
between 1 and 3 seconds.
4. The Powerline adapter will now create a
new encryption.
5. Press the Network security button 5 for
all cameras on the second network within
120 seconds.
The cameras will assume the new key
from the Powerline adapter and will now
work together with it.
For safety reasons, the transfer time is
restricted to 120 seconds. If you are not
immediately successful at setting all
cameras to the new key within this time,
start again at point 3.

9. Connecting an external loudspeaker

In order to be able to speak with your child
via
your
smartphone,
loudspeaker needs to be connected to the
video
camera.
particularly suitable here.
Note: Under certain circumstances, your
words may be transmitted at a delay due to
the fluctuating WLAN or mobile data
transmission rates.
The loudspeaker is connected to the
socket 3 with a 3.5 mm phone jack.
Technical data:
• Impedance: 8 Ohm or active loudspeaker
• Connection: 3.5 mm stereo phone jack
an
external
PC
loudspeakers
6. Connect the Powerline adapter and
cameras on the first network to the power
supply once again.
As both networks are now working with
different encryptions, they can be operated
independently of each other.
8.3 Resetting the encryption
To reset the encryption for the second
network
to
proceed as follows:
1. Press and hold the button
on the underside of the
Powerline adapter 17 for at
least 15 seconds.
The
encryption
Powerline adapter will then
be reset to the standard
encryption.
2. Press and hold the Network security
button 5 on the cameras for at least
15 seconds.
The encryption for the camera will then
be reset to the standard encryption.
are
33
the
standard
encryption,
for
the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10.256.351

Table des Matières