Publicité
Les langues disponibles
Les langues disponibles
KRT-01-4P
DIGITAL EARTH RESISTANCE TESTER
X. Battery Replacement
1,When the low battery symbol
the LCD,
the six 1.5V 'AA' batteries must be replaced.
2, Turn the meter off and remove the test leads
3, Unsnap the tilt stand from the rear of the meter
4, Remove the four Phillips head screws holding
the battery cover
5, Remove the battery compartment cover
6, Replace the batteries observing polarity
7, Affix the rear cover and secure the screws.
8, Reattach the tilt stand
10
appears on
www.grupotemper.com
Publicité
