Publicité
Les langues disponibles
Les langues disponibles
KRT-01-4P
DIGITAL EARTH RESISTANCE TESTER
Electronic Digital Earth Resistance Tester is direct replacement of
the conventional hand generator type tester. It is designed for
measurement of the resistance of earthing used in the electrical
equipment as well as for measurement of ground resistivity. It can
be used for measurements of the other low regular and liquid
resistances. It can also be used for measurement of voltage AC,
voltage DC and resistance.
This instrument finds wide application for testing earthing
installation in power based industries, telecommunication
networks and electrical traction systems etc.
I. SAFETY INFORMATION
Read the following safety information carefully before
attempting to operate or service the meter.
To avoid damages to the instrument do not apply the signals
which exceed the maximum limits shown in the technical
specifications tables.
Do not use the meter or test leads if they look damaged. Use
extreme caution when working around bare conductors or
bus bars.
Accidental contact with the conductor could result in electric
shock.
Use the meter only as specified in this manual; otherwise,
the protection provided by the meter may be impaired.
Read the operating instructions before use and follow all
safety Information.
Caution when working with voltages above 60V DC or 30V
AC RMS. Such voltages pose a shock hazard.
2
www.grupotemper.com
Publicité
