Kulzer i700 Mode D'emploi page 24

NOTE : ... I f necessary to achieve the IMMUNITY TEST LEVEL, the distance between
the transmitting antenna and the ME EQUIPMENT or ME SYSTEM may be
reduced to 1m. The 1m test distance is permitted by IEC 61000-4-3.
a) For some services, only the uplink frequencies are included.
b) The carrier shall be modulated using a 50% duty cycle square wave signal.
c) ... A s an alternative to FM modulation, a 50% pulse modulation at 18 Hz may
be used. While it does not represent actual modulation, it would be the worst
case.
22 User Manual
7 Specifications
Model Name MD-IS0200
Trade Name i700
Rating 9V , 3A
Applied part Type BF
DC Adapter
Model name ATM036T-P120
Universal...100-240...Vac.../...50-60...Hz...input,...without...
Input voltage
any...slide...switch
Output 12V , 3A
Case dimension 100...x...50...x...33...mm...(W...x...L...x...H)
EMI CE.../...FCC...Class...B,...Conduction...&...Radiation...met
OVP...(Over...Voltage...Protection)
Protection SCP...(Short...Circuit...Protection)
OCP...(Over...Current...Protection)
Protection against
Class I
electric shock
Mode of operation Continuous
Handpiece
Dimension 248...x...44...x...47.4...mm...(W...x...L...x...H)
Weight 245 g
Power Hub
Dimension 68.2 x 31 x 14.9 mm (W x L x H)
Weight 19 g