Functions Of The Equipment; Installation Diagram; First Commissioning; Keypad - Norsup UNO Notice D'utilisation

Masquer les pouces Voir aussi pour UNO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SALTKLORATOR TYPE OCEANCLEAR LS
1.

FUNCTIONS OF THE EQUIPMENT

2. INSTALLATION DIAGRAM

Model
Chlorine
pH
Regulation of
product-
regulation
chlorine pro-
ion via
duction with
electrolysis
ORP probe
UNO
The electrical connections at cell-level must not point upwards, to avoid any deposits of water or humidity
DUO
on them.
PRO
The pH corrector container must be installed a safe distance away from any electrical device or any other
chemicals.
16
H
19
22
KEY :
UNO model : white.
KEY :
1:
Salt / temperature /
DUO model : white + grey.
UNO model : white
low water sensor (optional)
PRO model : white + grey + black.
DUO model : white + grey
2:
Cell
PRO model : white + grey + black
3:
Electronics unit
4:
Filter with ballast
5:
Peristaltic pump
6:
Pool Ground (optional)
7, 8: Probe holder
9:
Injection connector
10:
ORP probe
11:
pH probe
12, 13: Bracket
14, 15: Semi-flexible tubing
96
WWW.NORSUP.EU
2.
INSTALLATION DIAGRAM
• The electrical connections at cell-level must not
point upwards, to avoid any deposits of water or
humidity on them.
• The pH corrector container must be installed a safe
distance away from any electrical device or any other
I
chemicals.
3
17
5
14
4
15
10
11
8
7
1
4
4
13
12
6
9
2
18
21
20
1 : Salt / temperature / low water sensor (optional)
2 : Cell
ELEMENTS NOT SUPPLIED :
3 : Electronics unit
4 : Filter with ballast
16:
Electrical power supply
5 : Peristaltic pump
17:
pH corrector container
6 : Pool Ground (optional)
18:
Copper cable
7,
8
: Probe holder
19:
Filter
9 : Injection connector
20: Ground rod
10
: ORP probe
21:
Heat pump
11 : pH probe
22: Filtration pump
12,
13
: Bracket
14, 15 : Semi-flexible tubing
ELEMENTS NOT SUPPLIED :
16 : Electrical power supply
17 : pH corrector container
Förändringar som tjänar såväl den tekniska utvecklingen som undantagna fel!
18 : Copper cable
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
SALTKLORATOR TYPE OCEANCLEAR LS
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT
3. ELECTRONICS UNIT

3.1. First commissioning

3.1. First commissioning
3. ELECTRONICS UNIT
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.1. First commissioning
3.
ELECTRONICS UNIT
When switching on the electronics unit for the first time, carry out the following programming.
3.1. First commissioning
When switching on the electronics unit for the first time, carry out the following programming.
3. ELECTRONICS UNIT
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
3. ELECTRONICS UNIT
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
3. ELECTRONICS UNIT
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
3.1. First commissioning
3.1. FIRST COMMISSIONING
3.1. First commissioning
Successive
Successive
When switching on the electronics unit for the first time, carry out the following programming.
When switching on the electronics unit for the first time, carry out the following programming.
Possible settings
Possible settings
Successive
Successive
Successive
Successive
Successive
Successive
Successive
menus
Successive
menus
Possible settings
Possible settings
Possible settings
Successive
Successive
Possible settings
Possible settings
Possible settings
Possible settings
Possible settings
When switching on the electronics unit for the first time, carry out the following programming.
menus
3.1. First commissioning
menus
menus
menus
menus
Possible settings
Possible settings
menus
menus
When switching on the electronics unit for the first time, carry out the following programming.
menus
3.1. First commissioning
Français
Successive
menus
Français
menus
3.1. First commissioning
Possible settings
SUCCESSIVE MENUS
Français
Français
POSSIBLE SETTINGS
Français
Français
Français
Français
Français
English
menus
Français
English
Français
Français
Successive
When switching on the electronics unit for the first time, carry out the following programming.
English
English
English
English
English
Successive
When switching on the electronics unit for the first time, carry out the following programming.
English
• Français
Possible settings
English
Deutsch
English
Deutsch
Français
When switching on the electronics unit for the first time, carry out the following programming.
English
English
Possible settings
menus
• English
menus
Deutsch
Deutsch
Deutsch
Deutsch
Deutsch
Deutsch
Deutsch
Successive
Español
Deutsch
Español
English
Deutsch
Deutsch
• Deutsch
Successive
Français
Possible settings
Español
Español
Español
Successive
menus
Español
Français
Español
Español
Español
Possible settings
Italiano
Español
Deutsch
• Español
Italiano
menus
Español
Español
Possible settings
English
menus
Italiano
Italiano
Italiano
Italiano
English
Italiano
Français
Italiano
Italiano
• Italiano
Nederlander
Italiano
Nederlander
Español
Italiano
Italiano
Français
Deutsch
• Nederlander
English
Français
Nederlander
Nederlander
Nederlander
Nederlander
Nederlander
Nederlander
Nederlander
Deutsch
Portugués
Nederlander
English
Portugués
Italiano
Nederlander
Nederlander
• Portugués
Español
English
Deutsch
Portugués
Portugués
Portugués
Portugués
Portugués
Portugués
Portugués
Español
Deutsch
Portugués
From 10 to 200 m
Nederlander
3
, in increments of 10.
From 10 to 200 m
Portugués
, in increments of 10.
Portugués
Deutsch
3
Español
Italiano
Español
From 10 to 200 m
From 10 to 200 m
From 10 to 200 m
Italiano
3
, in increments of 10.
3
, in increments of 10.
3
, in increments of 10.
From 10 to 200 m
From 10 to 200 m
3
3
, in increments of 10.
, in increments of 10.
From 10 to 200 m
From 10 to 200 m
3
3
, in increments of 10.
, in increments of 10.
From 10 to 200 m
Portugués
Español
, in increments of 10.
From 10 to 200 m3, in increments of 10.
Italiano
3
Day / Month / Year
From 10 to 200 m
From 10 to 200 m
3
, in increments of 10.
, in increments of 10.
Day / Month / Year
Nederlander
3
Italiano
Nederlander
Italiano
Day / Month / Year
Day / Month / Year
Day / Month / Year
Day / Month / Year
Day / Month / Year
Nederlander
Day / Month / Year
Day / Month / Year
From 10 to 200 m
3
, in increments of 10.
Day / Month / Year
Portugués
Hour / Minute
Nederlander
Day / Month / Year
Day / Month / Year
Hour / Minute
Portugués
Portugués
Nederlander
Hour / Minute
Hour / Minute
Hour / Minute
Hour / Minute
Hour / Minute
Portugués
Hour / Minute
Hour / Minute
Day / Month / Year
From 10 to 200 m
, in increments of 10.
Hour / Minute
Day / Month / Year
3
In line
Portugués
Hour / Minute
Hour / Minute
In line
From 10 to 200 m
3
, in increments of 10.
From 10 to 200 m
3
, in increments of 10.
From 10 to 200 m
3
, in increments of 10.
In line
In line
In line
In line
In line
In line
In line
Hour / Minute
Dashboard
From 10 to 200 m
3
, in increments of 10.
Day / Month / Year
In line
Dashboard
In line
In line
Day / Month / Year
Day / Month / Year
Dashboard
Day / Month / Year
Dashboard
Dashboard
Dashboard
Dashboard
Dashboard
Dashboard
Dashboard
Day / Month / Year
In line
Dashboard
Hour / Minute
Dashboard
Hour / Minute
Hour / Minute
Hour / Minute
Hour / Minute
Hour / Minute
Dashboard
In line
In line
In line
In line
• In line
Dashboard
In line

3.2. Keypad

3.2. Keypad
Dashboard
Dashboard
Dashboard
• Dashboard
Dashboard
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. Keypad
3.2. KEYPAD
COMMAND KEY
COMMAND KEY
3.2. Keypad
COMMAND KEY
COMMAND KEY
COMMAND KEY
3.2. Keypad
COMMAND KEY
COMMAND KEY
COMMAND KEY
COMMAND KEY
3.2. Keypad
(depending on
(depending on
COMMAND KEY
3.2. Keypad
COMMAND KEY
COMMAND KEY
3.2. Keypad
(depending on
(depending on
(depending on
(depending on
(depending on
COMMAND KEY
(depending on
(depending on
model)
(depending on
model)
COMMAND KEY
(depending on
(depending on
COMMAND KEY
(DEPENDING ON MODEL)
model)
model)
model)
model)
model)
COMMAND KEY
model)
model)
model)
Switching on the electronics unit.
(depending on
COMMAND KEY
Switching on the electronics unit.
model)
model)
(depending on
COMMAND KEY
(depending on
Switching on the electronics unit.
Switching on the electronics unit.
Switching on the electronics unit.
Switching on the electronics unit.
Switching on the electronics unit.
COMMAND KEY
Switching on the electronics unit.
(depending on
Switching on the electronics unit.
A few minutes after switching on, production starts automatically (with or without ORP
• Switching on the electronics unit.
model)
model)
Switching on the electronics unit.
A few minutes after switching on, production starts automatically (with or without ORP
Switching on the electronics unit.
Switching on the electronics unit.
(depending on
model)
A few minutes after switching on, production starts automatically (with or without ORP
A few minutes after switching on, production starts automatically (with or without ORP
A few minutes after switching on, production starts automatically (with or without ORP
A few minutes after switching on, production starts automatically (with or without ORP
A few minutes after switching on, production starts automatically (with or without ORP
A few minutes after switching on, production starts automatically (with or without
(depending on
model)
A few minutes after switching on, production starts automatically (with or without ORP
check).
A few minutes after switching on, production starts automatically (with or without ORP
Switching on the electronics unit.
A few minutes after switching on, production starts automatically (with or without ORP
Switching on the electronics unit.
check).
A few minutes after switching on, production starts automatically (with or without ORP
A few minutes after switching on, production starts automatically (with or without ORP
model)
Switching on the electronics unit.
ORP check).
check).
check).
check).
check).
check).
Switching on the electronics unit.
A few minutes after switching on, production starts automatically (with or without ORP
model)
check).
check).
MENU
Switching off the electronics unit (press and hold).
check).
MENU
Switching off the electronics unit (press and hold).
A few minutes after switching on, production starts automatically (with or without ORP
check).
• Switching off the electronics unit (press and hold).
A few minutes after switching on, production starts automatically (with or without ORP
check).
Switching on the electronics unit.
A few minutes after switching on, production starts automatically (with or without ORP
MENU
MENU
MENU
Switching off the electronics unit (press and hold).
Switching off the electronics unit (press and hold).
Switching off the electronics unit (press and hold).
check).
MENU
MENU
Switching off the electronics unit (press and hold).
Switching off the electronics unit (press and hold).
MENU
MENU
Switching off the electronics unit (press and hold).
Switching off the electronics unit (press and hold).
MENU
Switching on the electronics unit.
When switching off, the screen and the green LED turn off while the red LED comes on.
Switching off the electronics unit (press and hold).
When switching off, the screen and the green LED turn off while the red LED comes on.
check).
When switching off, the screen and the green LED turn off while the red LED comes on.
check).
MENU
MENU
Switching off the electronics unit (press and hold).
Switching off the electronics unit (press and hold).
check).
MENU
A few minutes after switching on, production starts automatically (with or without ORP
Switching off the electronics unit (press and hold).
When switching off, the screen and the green LED turn off while the red LED comes on.
When switching off, the screen and the green LED turn off while the red LED comes on.
When switching off, the screen and the green LED turn off while the red LED comes on.
When switching off, the screen and the green LED turn off while the red LED comes on.
When switching off, the screen and the green LED turn off while the red LED comes on.
If an alarm has been activated, press first on
When switching off, the screen and the green LED turn off while the red LED comes on.
When switching off, the screen and the green LED turn off while the red LED comes on.
A few minutes after switching on, production starts automatically (with or without ORP
MENU
If an alarm has been activated, press first on
When switching off, the screen and the green LED turn off while the red LED comes on.
Switching off the electronics unit (press and hold).
If an alarm has been activated, press first on
MENU
Switching off the electronics unit (press and hold).
When switching off, the screen and the green LED turn off while the red LED comes on.
When switching off, the screen and the green LED turn off while the red LED comes on.
MENU
Switching off the electronics unit (press and hold).
When switching off, the screen and the green LED turn off while the red LED comes on.
• Access the menus.
check).
If an alarm has been activated, press first on
If an alarm has been activated, press first on
If an alarm has been activated, press first on
If an alarm has been activated, press first on
If an alarm has been activated, press first on
When switching off, the screen and the green LED turn off while the red LED comes on.
If an alarm has been activated, press first on
If an alarm has been activated, press first on
check).
Access the menus.
If an alarm has been activated, press first on
Access the menus.
When switching off, the screen and the green LED turn off while the red LED comes on.
When switching off, the screen and the green LED turn off while the red LED comes on.
If an alarm has been activated, press first on
If an alarm has been activated, press first on
If an alarm has been activated, press first on
MENU
Switching off the electronics unit (press and hold).
If an alarm has been activated, press first on
Access the menus.
Access the menus.
Access the menus.
Access the menus.
Access the menus.
MENU
Access the menus.
Access the menus.
Switching off the electronics unit (press and hold).
BOOST
Boost mode starts for 24 hours.
Access the menus.
If an alarm has been activated, press first on
If an alarm has been activated, press first on
Access the menus.
BOOST
Boost mode starts for 24 hours.
Access the menus.
Access the menus.
Boost mode starts for 24 hours.
When switching off, the screen and the green LED turn off while the red LED comes on.
Access the menus.
BOOST
BOOST
Boost mode starts for 24 hours.
Boost mode starts for 24 hours.
BOOST
BOOST
BOOST
Boost mode starts for 24 hours.
Boost mode starts for 24 hours.
Boost mode starts for 24 hours.
BOOST
Boost mode starts for 24 hours.
Boost mode starts for 24 hours.
When switching off, the screen and the green LED turn off while the red LED comes on.
Access the menus.
BOOST
BOOST
Boost mode starts for 24 hours.
BOOST
Boost mode starts for 24 hours.
Water temperature display for a few seconds (only if the default display is set to « In line
Access the menus.
BOOST
Boost mode starts for 24 hours.
Water temperature display for a few seconds (only if the default display is set to « In line
BOOST
Boost mode starts for 24 hours.
BOOST
Boost mode starts for 24 hours.
If an alarm has been activated, press first on
BOOST
Water temperature display for a few seconds (only if the default display is set to « In line
Water temperature display for a few seconds (only if the default display is set to « In line
Boost mode starts for 24 hours.
Water temperature display for a few seconds (only if the default display is set to « In line
Water temperature display for a few seconds (only if the default display is set to « In line
Water temperature display for a few seconds (only if the default display is set to « In line
If an alarm has been activated, press first on
Water temperature display for a few seconds (only if the default display is set to « In line
Water temperature display for a few seconds (only if the default display is set to « In line
Water temperature display for a few seconds (only if the default display is set to « In line
T°C
display »).
BOOST
Boost mode starts for 24 hours.
Water temperature display for a few seconds (only if the default display is set to « In line
T°C
display »).
• Water temperature display for a few seconds (only if the default display is set to
Water temperature display for a few seconds (only if the default display is set to « In line
Water temperature display for a few seconds (only if the default display is set to « In line
Water temperature display for a few seconds (only if the default display is set to « In line
Access the menus.
Water temperature display for a few seconds (only if the default display is set to « In line
T°C
T°C
T°C
T°C
display »).
display »).
display »).
display »).
T°C
T°C
display »).
display »).
Access the menus.
T°C
T°C
display »).
display »).
« In line display »).
Direct access to the «
T°C
display »).
display »).
T°C
Direct access to the «
Water temperature display for a few seconds (only if the default display is set to « In line
T°C
display »).
T°C
display »).
BOOST
T°C
Boost mode starts for 24 hours.
display »).
Direct access to the «
• Direct access to the «
Direct access to the «
Direct access to the «
BOOST
Boost mode starts for 24 hours.
Direct access to the «
Direct access to the «
Direct access to the «
Direct access to the «
Direct access to the «
Direct access to the «
Salt level display for a few seconds (only if the default display is set to « In line display »).
Direct access to the «
T°C
display »).
Salt level display for a few seconds (only if the default display is set to « In line display »).
Direct access to the «
Direct access to the «
Direct access to the «
SALT
Water temperature display for a few seconds (only if the default display is set to « In line
Salt level display for a few seconds (only if the default display is set to « In line display »).
SALT
Salt level display for a few seconds (only if the default display is set to « In line display »).
Salt level display for a few seconds (only if the default display is set to « In line display »).
SALT
Salt level display for a few seconds (only if the default display is set to « In line display »).
Salt level display for a few seconds (only if the default display is set to « In line display »).
Salt level display for a few seconds (only if the default display is set to « In line display »).
Water temperature display for a few seconds (only if the default display is set to « In line
Salt level display for a few seconds (only if the default display is set to « In line display »).
Salt level display for a few seconds (only if the default display is set to « In line display »).
Salt level display for a few seconds (only if the default display is set to « In line display »).
Direct access to the «
• Salt level display for a few seconds (only if the default display is set to « In line display »).
Salt level display for a few seconds (only if the default display is set to « In line display »).
Direct access to the «
Direct access to the «
Salt level display for a few seconds (only if the default display is set to « In line display »).
SALT
SALT
SALT
SALT
SALT
SALT
Salt level display for a few seconds (only if the default display is set to « In line display »).
Direct access to the «
Salt level display for a few seconds (only if the default display is set to « In line display »).
SALT
SALT
T°C
display »).
SALT
SALT
Direct access to the «
Direct access to the «
Direct access to the «
SALT
SALT
T°C
Direct access to the «
Direct access to the «
Direct access to the «
display »).
• Direct access to the «
Direct access to the «
Direct access to the «
This command key is only present on the DUO and PRO models.
Direct access to the «
Direct access to the «
This command key is only present on the DUO and PRO models.
Salt level display for a few seconds (only if the default display is set to « In line display »).
This command key is only present on the DUO and PRO models.
Direct access to the «
Direct access to the «
Direct access to the «
This command key is only present on the DUO and PRO models.
SALT
pH
pH
pH
This command key is only present on the DUO and PRO models.
This command key is only present on the DUO and PRO models.
Direct access to the «
This command key is only present on the DUO and PRO models.
This command key is only present on the DUO and PRO models.
This command key is only present on the DUO and PRO models.
This command key is only present on the DUO and PRO models.
This command key is only present on the DUO and PRO models.
This command key is only present on the DUO and PRO models.
pH
Direct access to the «
This command key is only present on the DUO and PRO models.
Direct access to the «
Direct access to the «
g This command key is only present on the DUO and PRO models.
Direct access to the «
This command key is only present on the DUO and PRO models.
pH
pH
pH
This command key is only present on the DUO and PRO models.
pH
pH
pH
pH
pH
Salt level display for a few seconds (only if the default display is set to « In line display »).
Direct access to the «
pH
pH
pH
Direct access to the «
Direct access to the «
Direct access to the «
Direct access to the «
Salt level display for a few seconds (only if the default display is set to « In line display »).
Direct access to the «
Direct access to the «
SALT
• Direct access to the «
Direct access to the «
Direct access to the «
Direct access to the «
This command key is only present on the DUO and PRO models.
Selecting a value or data element.
SALT
Direct access to the «
Direct access to the «
Selecting a value or data element.
Direct access to the «
pH
Selecting a value or data element.
Selecting a value or data element.
Direct access to the «
Selecting a value or data element.
Selecting a value or data element.
Selecting a value or data element.
Selecting a value or data element.
Direct access to the «
Selecting a value or data element.
Selecting a value or data element.
Selecting a value or data element.
Selecting a value or data element.
This command key is only present on the DUO and PRO models.
Cancellation of an entry
Selecting a value or data element.
Selecting a value or data element.
Selecting a value or data element.
Selecting a value or data element.
This command key is only present on the DUO and PRO models.
Cancellation of an entry
Cancellation of an entry
pH
Cancellation of an entry
Cancellation of an entry
Back to previous menu.
pH
Direct access to the «
Cancellation of an entry
Selecting a value or data element.
Cancellation of an entry
Cancellation of an entry
Cancellation of an entry
Cancellation of an entry
Cancellation of an entry
Cancellation of an entry
Back to previous menu.
Back to previous menu.
Direct access to the «
Cancellation of an entry
Back to previous menu.
Cancellation of an entry
Back to previous menu.
Cancellation of an entry
Stopping Boost mode.
• Cancellation of an entry
Back to previous menu.
Back to previous menu.
Stopping Boost mode.
Back to previous menu.
Back to previous menu.
Back to previous menu.
Back to previous menu.
Back to previous menu.
Selecting a value or data element.
Stopping Boost mode.
Back to previous menu.
Stopping Boost mode.
Stopping Boost mode.
Cancellation of an entry
Back to previous menu.
Command confirmation.
Back to previous menu.
Selecting a value or data element.
• Back to previous menu.
Command confirmation.
Stopping Boost mode.
Stopping Boost mode.
Stopping Boost mode.
Stopping Boost mode.
Stopping Boost mode.
Stopping Boost mode.
Stopping Boost mode.
OK
Command confirmation.
Stopping Boost mode.
Command confirmation.
Back to previous menu.
• Stopping Boost mode.
Entering a menu.
Command confirmation.
Stopping Boost mode.
Stopping Boost mode.
OK
Cancellation of an entry
Entering a menu.
OK
Command confirmation.
Command confirmation.
Command confirmation.
Command confirmation.
Cancellation of an entry
Command confirmation.
Entering a menu.
Dismissing an alarm.
Command confirmation.
Command confirmation.
OK
Entering a menu.
Stopping Boost mode.
Command confirmation.
OK
Entering a menu.
• Command confirmation.
Command confirmation.
Command confirmation.
Dismissing an alarm.
Back to previous menu.
Dismissing an alarm.
OK
OK
OK
OK
Entering a menu.
Entering a menu.
Back to previous menu.
Entering a menu.
OK
Entering a menu.
Entering a menu.
OK
OK
Entering a menu.
Entering a menu.
• Entering a menu.
OK
Dismissing an alarm.
Entering a menu.
Command confirmation.
Dismissing an alarm.
OK
OK
Entering a menu.
Entering a menu.
Stopping Boost mode.
Dismissing an alarm.
Dismissing an alarm.
Dismissing an alarm.
• Dismissing an alarm.
Dismissing an alarm.
Stopping Boost mode.
Dismissing an alarm.
Dismissing an alarm.
Dismissing an alarm.
Dismissing an alarm.
OK
Entering a menu.
Dismissing an alarm.
Dismissing an alarm.
Command confirmation.
Command confirmation.
Dismissing an alarm.
OK
Entering a menu.
OK
Entering a menu.
Dismissing an alarm.
Dismissing an alarm.
Förändringar som tjänar såväl den tekniska utvecklingen som undantagna fel!
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
Navigation
NAVIGATION
Navigation
Navigation
Navigation
Navigation
Navigation
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
For each parameter, select a data item with the
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
For each parameter, select a data
buttons, then confirm with the OK button.
item with the   buttons, then
For each parameter, select a data item with the
For each parameter, select a data item with the
For each parameter, select a data item with the
confirm with the OK button.
buttons, then confirm with the OK button.
For each parameter, select a data item with the
buttons, then confirm with the OK button.
For each parameter, select a data item with the
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
buttons, then confirm with the OK button.
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
to switch off.
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
» menu (press and hold).
4
4
4
ANVÄNDARMANUAL NORSUP
97
EN
DE
NL
FR
DK
SE
4
4
4
4
4
4
4
4
4
4
4
4
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

DuoPro

Table des Matières