Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SALT CHLORINATOR TYPE OCEANCLEAR LS
3.6.21. Bluetooth communication
3.6.21. Bluetooth communication
3.6.21. Bluetooth communication
3.6.21. Bluetooth communication
Menu
Setting
Menu
Setting
3.6.21. BLUETOOTH COMMUNICATION
Menu
Setting
Activation/deactivation
Activation/deactivation
Mode
Activation/deactivation
Mode
communication.
Menu
Mode
Setting
MENU
SETTING
communication.
communication.
Detection of connectible devices near
Detection of connectible devices near
Activation/deactivation
Detection of connectible devices near
the electronics unit (within 60 seconds).
Mode
Activation/deactivation of Bluetooth
the electronics unit (within 60 seconds).
Pairing
communication.
Mode
the electronics unit (within 60 seconds).
Pairing
Networking of the electronics unit and
Pairing
Networking of the electronics unit and
Detection of connectible devices near
Networking of the electronics unit and
connected devices.
connected devices.
• Detection of connectible devices near the
connected devices.
the electronics unit (within 60 seconds).
Removal of the network connecting the
electronics unit (within 60 seconds).
Pairing
Removal of the network connecting the
Reset
Pairing
Reset
Removal of the network connecting the
Networking of the electronics unit and
electronics unit to the connected devices.
• Networking of the electronics unit and
Reset
electronics unit to the connected devices.
electronics unit to the connected devices.
connected devices.
connected devices.
During an update of the software of the electronics unit carried out using Bluetooth, the 2 LEDs (red and green)
Removal of the network connecting the
Removal of the network connecting the
During an update of the software of the electronics unit carried out using Bluetooth, the 2 LEDs (red and green)
Reset
Reset
During an update of the software of the electronics unit carried out using Bluetooth, the 2 LEDs (red and green)
electronics unit to the connected devices.
flash alternately.
electronics unit to the connected devices.
flash alternately.
flash alternately.
g During an update of the software of the electronics unit carried out using Bluetooth, the 2 LEDs (red and green)
flash alternately.
During an update of the software of the electronics unit carried out using Bluetooth, the 2 LEDs (red and green)
3.6.22. Chlorination test
flash alternately.
3.6.22. Chlorination test
3.6.22. Chlorination test
3.6.22. CHLORINATION TEST
This function is for use by professionals for maintenance operations on the equipment.
This function is for use by professionals for maintenance operations on the equipment.
g This function is for use by professionals for maintenance operations on the equipment.
This function is for use by professionals for maintenance operations on the equipment.
3.6.22. Chlorination test
Menu
Menu
MENU
Menu
This function is for use by professionals for maintenance operations on the equipment.
Menu
OK
OK
OK
(Wait a few seconds)
(Wait a few seconds)
(Wait a few seconds)
OK
or
or
or
(Wait a few seconds)
or
or
or
or
OK
Press and hold.
OK
Press and hold.
OK
Press and hold.
or
OK
Press and hold.
3.6.23. Settings reset
3.6.23. Settings reset
3.6.23. Settings reset
3.6.23. SETTINGS RESET
Menu
Menu
MENU
Menu
3.6.23. Settings reset
Resetting the parameters cancels all the settings made (factory configuration).
Resetting the parameters cancels all the settings made (factory configuration).
Resetting the parameters cancels all the settings made (factory configuration).
Resetting the parameters cancels all the settings made (factory configuration).
Menu
Resetting the parameters cancels all the settings made (factory configuration).
16
WWW.NORSUP.EU
Function
Possible settings
Default setting
Function
Possible settings
Default setting
Function
Possible settings
Default setting
of
Bluetooth
ON
of
Bluetooth
ON
of
Bluetooth
ON
OFF
Function
Possible settings
FUNCTION
POSSIBLE
OFF
DEFAULT
OFF
SETTINGS
SETTING
of
Bluetooth
ON
ON
OFF
communication.
OFF
-
-
-
-
Navigation
Navigation
NAVIGATION
Navigation
Navigation
-time timer countdown
-time timer countdown
-time timer countdown
-time timer countdown
Currents and voltages supplying the cell, on each direction
Currents and voltages supplying the cell, on each direction
of polarity inversion (values for illustrative purposes only).
Currents and voltages supplying the cell, on each direction
of polarity inversion (values for illustrative purposes only).
of polarity inversion (values for illustrative purposes only).
Currents and voltages supplying the cell, on each direction
of polarity inversion (values for illustrative purposes only).
Important warning
Important warning
IMPORTANT WARNING
Important warning
I
I
I
Important warning
I
Alterations which serve the technological progress as well as errors excepted!
3.7.1. Wintering mode
3.7.1. Wintering mode
Wintering mode :
3.7. Safety
Wintering mode :
- is activated by default.
SALT CHLORINATOR TYPE OCEANCLEAR LS
- is activated by default.
- starts automatically as soon as the water temperature drops below 15°C.
- starts automatically as soon as the water temperature drops below 15°C.
3.7.1. Wintering mode
When wintering mode is on :
When wintering mode is on :
- The message «
- The message «
- Production is stopped.
Wintering mode :
3.7. SAFETY
- Production is stopped.
- The pH regulation is maintained if it is activated.
- is activated by default.
ON
- The pH regulation is maintained if it is activated.
ON
- starts automatically as soon as the water temperature drops below 15°C.
3.7.1. WINTERING MODE
ON
Default setting
• Wintering mode :
To switch off wintering mode : press on OK.
- is activated by default.
To switch off wintering mode : press on OK.
When wintering mode is on :
ON
- starts automatically as soon as the water temperature drops below 15°C.
ON
To disable wintering mode : go to the «
- The message «
To disable wintering mode : go to the «
• When wintering mode is on :
- Production is stopped.
- The message « » is displayed.
- The pH regulation is maintained if it is activated.
- Production is stopped.
3.7.2. Alarms
- The pH regulation is maintained if it is activated.
-
3.7.2. Alarms
To switch off wintering mode : press on OK.
To switch off wintering mode : press on OK.
All alarms are activated by default.
To disable wintering mode : go to the «
To disable wintering mode : go to the
All alarms are activated by default.
Any alarm that is activated immediately appears on the screen.
Any alarm that is activated immediately appears on the screen.
3.7.2. ALARMS
To dismiss an alarm : press the OK or
• All alarms are activated by default.
3.7.2. Alarms
To dismiss an alarm : press the OK or
• Any alarm that is activated immediately appears on the screen.
• To dismiss an alarm : press the OK or
All alarms are activated by default.
MESSAGE
AUTOMATIC ACTION
MESSAGE
AUTOMATIC ACTION
DISPLAYED
Any alarm that is activated immediately appears on the screen.
MESSAGE
DISPLAYED
/ FAULT
DISPLAYED
Stopping
To dismiss an alarm : press the OK or
/ FAULT
/ FAULT
Stopping
DETECTED
production
DETECTED
DETECTED
production
IMMEDIATE
MESSAGE
AUTOMATIC ACTION
DISPLAYED
/ FAULT
Stopping
DETECTED
production
No
Yes
13
13
13
Alterations which serve the technological progress as well as errors excepted!
» is displayed.
» is displayed.
», «
» is displayed.
», «
», «
button (short or long press, depending on the alarm).
button (short or long press, depending on the alarm).
button (short or long press, depending on the alarm).
IMMEDIATE
IMMEDIATE
IMMEDIATE
CAUSE
CHECKS AND REMEDIES
Stopping
CAUSE
AUTOMATIC ACTION
Stopping
CAUSE
pH
button (short or long press, depending on the alarm).
Stopping
Stopping pH
pH
regulation
production
regulation
regulation
pH corrector container
Replace
No
Yes
pH corrector container
pH corrector
Replace
empty.
container.
Replace the pH corrector
No
Yes
No
Yes
container
empty.
container.
Check that the cell is not scaled.
empty.
Stopping
CAUSE
CHECKS AND REMEDIES
Check that the cell is not scaled.
Inspect and adjust if necessary
• Check that the cell is not
pH
Inspect and adjust if necessary
the inversion frequency of the
scaled.
regulation
the inversion frequency of the
• Inspect and adjust if
current
necessary the inversion
current
(«
pH corrector container
Replace
the
Yes
frequency of the current
(«
menu).
empty.
container.
supplying the cell (« »
menu).
Check
menu).
Check that the cell is not scaled.
Check
• Check that the electrical
connections to the terminals of
Inspect and adjust if necessary
connections to the terminals
connections to the terminals of
Yes
No
Cell problem.
the cell are sufficiently tight and
the inversion frequency of the
Yes
No
Cell problem.
of the cell are sufficiently
Yes
No
Cell problem.
the cell are sufficiently tight and
not oxidised.
current
supplying
tight and not oxidised.
not oxidised.
• Check that the cell's power
Check that the cell's power
(«
cable is in good condition.
Check that the cell's power
cable is in good condition.
menu).
• Check that the cell's power
cable is in good condition.
Check that the cell's power
Check
that
cable connector is correctly
Check that the cell's power
cable connector is correctly
connected to the electronics
connections to the terminals of
unit.
cable connector is correctly
connected to the electronics
No
Cell problem.
the cell are sufficiently tight and
• As a last resort, replace the
connected to the electronics
unit.
not oxidised.
cell.
unit.
As a last resort, replace the cell.
Check that the cell's power
As a last resort, replace the cell.
cable is in good condition.
Check that the cell's power
cable connector is correctly
connected to the electronics
unit.
As a last resort, replace the cell.
EN
DE
» menu.
» menu.
NL
FR
» menu.
menu.
DK
OPTION TO
OPTION TO
DEACTIVATE
DEACTIVATE
VIA THE
OPTION TO
SE
CHECKS AND REMEDIES
VIA THE
MENU
DEACTIVATE
CHECKS AND REMEDIES
VIA THE
MENU
«
MENU
«
»
»
the
pH
corrector
OPTION TO
Yes
the
pH
corrector
DEACTIVATE
Yes
Yes
container.
VIA THE
MENU
«
»
supplying
the
cell
supplying
the
cell
»
pH
corrector
Yes
»
that
the
electrical
that
the
electrical
No
No
No
the
cell
»
the
electrical
No
14
14
14
ORIGINAL MANUAL NORSUP
17
Publicité
Chapitres
Table des Matières
