Denon AVR-2106 Mode D'emploi page 41

Advanced Setup – Part 1
Setting the Auto Tuner Preset
Use this to automatically search for FM broadcasts and store up
to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to
8, E1 to 8, F1 to 8 and G1 to 8.
1 CURSOR D D H H
Press the or button to select "Auto
Tuner Preset" at the "Input Setup" menu, then
ENTER
press the button.
• The "Auto Tuner Preset" screen appears.
2 CURSOR F F
Press the button to select "Start".
• "Search" appears on the screen and searching begins.
• "Completed" appears once searching is completed.
3 CURSOR D D H H
Press the or
ENTER
"Exit", then press the
• The "System Setup" menu appears.
Advanced playback
Setting the Audio Delay
• When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound. In this
case, adjust the audio delay to delay the sound and synchronize
it with the picture.
• The audio delay setting is stored separately for each input
source.
1
Press the
"Advanced Playback" at the "System Setup"
menu, then press the
• The "Advanced Playback" screen appears.
button to select
2
button. Press the
"Audio Delay", then press the
• The "Audio Delay" screen appears.
3
Press the
delay time (0 ms ~ 200 ms).
With a movie source, for example, adjust so that the
movement of the actors' lips is synchronized with the
sound.
4
Press the
• The "Advanced Playback" menu appears.
CURSOR D D H H
or button to select
ENTER
button.
CURSOR D D H H
or button to select
ENTER
button.
CURSOR F F G G
or button to set the
ENTER
button to enter the setting.
38
ENGLISH
Advanced Setup – Part 1
• The audio delay setting does not apply when playing in the EXT.
IN mode or in the analog input direct, pure direct or stereo
mode (TONE DEFEAT "ON").
Setting the Auto Surround Mode
The surround mode used last for the three types of input signals
shown below is stored in the memory, and the signal is
automatically played with that surround mode the next time it is
input.
Note that the surround mode setting is also stored separately for
the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals in the Dolby Digital, DTS or another multi-
channel format (DOLBY PL II x Cinema)
e Multi-channel signals in the Dolby Digital, DTS or another
multi-channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround
mode does not change even if the input signal is changed.
1 CURSOR D D H H
Press the or
"Auto Surround Mode" at the "Advanced
Playback" menu, then press the
• The "Auto Surround Mode" screen appears.
2
CURSOR F F G G
Press the or button to select "ON"
if you want to use the auto surround mode, or
"OFF" if you do not want to use it.
ENGLISH
button to select
ENTER
button.