Denon AVR-2106 Mode D'emploi page 23

Basic Operation
Dolby Pro Logic II x (Pro Logic
II
• To play in the PL x mode, set "S. BackSp" at the "Speaker
Configuration" setting to "1sp" or "2sp".
II
• To play in the PL PL x mode, set "Surround Back" at the
"Power Amp Assign" setting.
1
STANDARD
Press the button to select the Dolby
Pro Logic IIx mode.
• The Dolby Pro Logic II indicator lights.
lights
The mode switches as shown below each time the
STANDARD button is pressed.
DOLBY PL II x DTS NEO:6
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
3
SURROUND PARAMETER
Press the
select the surround parameter mode.
4
SELECT
Turn the knob, and press the
F F G G
or button to select the optimum mode for
the source.
II ) mode
When the "SB CH OUT" parameter is set to "ON". (Set "S.
BACK" at system setup to "SMALL" or "LARGE".)
Display
When the "SB CH OUT" parameter is set to "OFF". (Set
"S. BACK" at system setup to "NONE".)
Display
5
Press the
button to
press the
various parameters.
Example: DOLBY PL
CURSOR
See "Surround parameters q" for a description of the
various parameters.
6
Turn the
F F G G
or
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
(Pro Logic II x Cinema mode)
II
(Pro Logic x Music mode)
(Pro Logic II x Game mode)
(Pro Logic II Cinema mode)
(Pro Logic II Music mode)
(Pro Logic II Game mode)
(Dolby Pro Logic mode)
SURROUND PARAMETER
button, and
CURSOR D D H H
or button to select the
II
x music mode screen
SELECT CURSOR
knob, and press the
button to set the various surround
20
ENGLISH
7
ENTER
Press the button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
2 Surround parameters q
Pro Logic II x and Pro Logic II Mode:
The Cinema mode is for use with stereo television shows and
all programs encoded in Dolby Surround.
The Music mode is recommended for stereo music and
surround-encoded stereo music sources.
The Pro Logic mode offers the same robust surround
processing as original Pro Logic in case the source content is
not of optimum quality.
The Game mode is for playing games. The game mode can only
be used with 2-channel audio sources.
Select one of the modes ("Cinema", "Music", "Pro Logic" or
"Game").
• Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.
Select "OFF" or "ON".
• Dimension Control:
This control gradually adjusts the soundfield either towards
the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
• Center Width Control:
This control adjusts the center image so it may be heard only
from the center speaker; only from the left/right speakers as
a phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.
ENGLISH
Basic Operation