Denon AVR-2106 Mode D'emploi page 22

ENGLISH
Basic Operation
2 Input mode display
• In the AUTO mode
• In the DIGITAL PCM mode
• In the DIGITAL DTS mode
• In the ANALOG mode
2 Input signal display
• DOLBY DIGITAL
The "DIGITAL" indicator lights when
digital signals are being input
• DTS
properly. If the "DIGITAL" indicator
does not light, check whether the
Digital
connections
whether the component's power is
• PCM
turned on.
NOTE:
• The "DIGITAL" indicator will light when playing CD-ROMs
containing data other than audio signals, but no sound will
be heard.
Surround
Depending on the input signal.
Playing audio sources (CDs and DVDs)
2-channel playback modes
• The AVR-2106 is equipped with 2-channel playback modes
exclusively for music.
• Select the mode to suit your tastes.
2 PURE DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass such
circuits as the tone circuit and display circuit and are transmitted
In Assign. setup and
directly, resulting in good quality sound.
are correct and
Press the
the main unit or the
the remote control unit to select the PURE DIRECT
mode.
STEREO/DIRECT/PURE DIRECT
STANDARD SELECT
SURROUND PARAMETER
STEREO/DIRECT/PURE DIRECT
button on
DIRECT/PURE DIRECT
button on
19
ENGLISH
STANDARD
DIRECT/
PURE DIRECT
ENTER
CURSOR
2 DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass such
circuits as the tone circuit and are transmitted directly, resulting
in good quality sound.
STEREO/DIRECT/PURE DIRECT
Press the
DIRECT/PURE DIRECT
the main unit or the
the remote control unit to select the DIRECT mode.
2 STEREO mode
Use this mode to adjust the tone and achieve the desired sound
while watching images.
STEREO/DIRECT/PURE DIRECT
Press the
STEREO
the main unit or the button on the remote
control unit to select the STEREO mode.
Basic Operation
STEREO
SURROUND
PARAMETER
button on
button on
button on