Denon AVR-2106 Mode D'emploi page 19

Connecting Other Sources
Connecting the pre-out terminals
• Use these terminals if you wish to connect external power amplifier(s) to increase the power of
the front, center, surround and surround back sound channels, or for connection to powered
loudspeakers.
• When using only one surround back speaker, connect it to the left channel.
Connecting the power supply cord
NOTE:
• Only use the AC OUTLET for connecting audio equipment. Never use it for hair driers, TVs or
other electrical appliances.
Power amplifier
B
CENTER
A
SURROUND
L L
L
R R
R
A
SURROUND
BACK
L L
L
R R
R
B
SUB-
WOOFER
A
FRONT
L L
L
R R
R
AC outlet
(wall)
AC 230 V, 50 Hz
AC OUTLET
• SWITCHED (total capacity – 100 W)
The power to this outlet is turned on and off
in conjunction with the POWER switch on the
main unit, and when the power is switched
between on and standby from the remote
control unit.
No power is supplied from this outlet when
this unit's power is at standby. Never connect
equipment whose total power consumption
exceeds 100 W.
16
ENGLISH
ENGLISH