Denon AVR-2106 Mode D'emploi page 32

ENGLISH
Basic Operation
FUNCTION PRESET
RDS search
Use this function to automatically tune to FM stations that
provide the RDS service.
1
Set the input source to "TUNER".
(Main unit)
2
RDS
Press the button until "RDS SEARCH"
appears on the display.
3
PRESET •
Press the (+) or
• The search for RDS stations begins automatically.
If no RDS stations are found with the above operation, all
the reception bands are searched.
When a broadcast station is found, that station's name
appears on the display.
4
To continue searching, repeat step 3.
If no RDS station is found when all the frequencies have
been searched, "NO RDS" is displayed.
PTY
TUNER
RDS RT
PTY search
Use this function to find RDS stations broadcasting a designated
program type (PTY).
For a description of each program type, refer to "Program Type
(PTY)".
1
Set the input source to "TUNER".
2
Press the
(Remote control unit)
appears on the display.
3
Watching the display, press the
call out the desired program type.
ª ª
(–) button.
4
Press the
• PTY search begins automatically.
If there is no station broadcasting the designated program
type with the above operation, all the reception bands are
searched.
The station name is displayed on the display after searching
stops.
PRESET
RDS
button until "PTY SEARCH"
PTY
button to
PRESET • ª ª
(+) or (–) button.
29
ENGLISH
5
To continue searching, repeat step 4.
If no station broadcasting the designated program type is
found when all the frequencies have been searched, "NO
PROGRAMME" is displayed.
TP search
Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
Set the input source to "TUNER".
2
RDS
Press the button until "TP SEARCH"
appears on the display.
3
ª ª
PRESET •
Press the (+) or (–) button.
• TP search begins automatically.
If no TP station is found with the above operation, all the
reception bands are searched.
The station name is displayed on the display after searching
stops.
4
To continue searching, repeat step 3.
If no other TP station is found when all the frequencies have
been searched, "NO PROGRAMME" is displayed.
Basic Operation