Télécharger Imprimer la page

Denon Professional DN-V750 Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
In the LD Compatible Mode
The following describes how to set playback using the controls on the DN-V750/V755.
Before doing this, prepare a recorded medium on which the file(s) to be played are recorded, as described in the section "3
RECORDING MEDIUM CONTENTS
2 Playing
Set MODE selector switch 1 (on the rear panel) to the "ON" position, 2 to the "OFF" position. Connect the DN-V750/V755's video
output to an external monitor and turn on the power.
1
2 Stopping playback
To stop playback, press the "STOP" button.
The video output switches as follows, depending on the setting of MODE SWITCH-3 on the rear panel :
• When MODE SWITCH-3 is set to "ON"
• When MODE SWITCH-3 is set to "OFF"
2 Playing the next chapter
• In the stop mode
Press the "STOP" button while pressing the "SELECT" button. The file is played from the beginning.
• In the play mode
If a chapter definition file is recorded in AV DATA directory, press the "STOP" button while pressing the "SELECT" button. The next
chapter is played.
2 To play the previous chapter
• In the stop mode
Press the "PLAY" button while pressing the "SELECT" button. The file is played from the beginning.
• In the play mode
If a chapter definition file is recorded in AV DATA directory, press the "PLAY" button while pressing the "SELECT" button within 1
second from the beginning of the current chapter. The previous chapter is played. If the "PLAY" button is pressed while pressing
the "SELECT" button more than 1 second into the current chapter, the current chapter is played over from the beginning.
If no chapter definition file is recorded in AV DATA directory, playback will always start from the beginning of the file when the
"PLAY" button is pressed while pressing the "SELECT" button.
18
".
Press the "1PLAY/3PAUSE" button to start playback.
If there are no files to play, a warning message is displayed, all the buttons
stop operating and error codes are issued for all serial control commands.
: Still images are output.
: A blue screen is output.

Publicité

loading

Ce manuel est également adapté pour:

Dn-v755