Denon Professional DN-V750 Mode D'emploi page 12

ENGLISH
6 CONNECTIONS TO EXTERNAL DEVICES
Parallel controller
1. Connect the PARALLEL REMOTE terminal to conduct parallel control.
2. Connect the SERIAL REMOTE terminal to conduct external serial control.
Use a serial straight-through cable for connection with a computer.
3. Connect the ETHERNET terminal to conduct 10 Base/100 Base LAN control.
4. Connect the analog AUDIO OUTPUT terminals to use the analog audio output.
5. Use the COMPOSITE VIDEO OUTPUT terminal to connect the DN-V750/V755 to the composite video input of a video monitor (TV,
etc.).
To connect to a device other than a video monitor, the connected device must be terminated at 75Ω.
6. Use the S-VIDEO OUTPUT terminal to connect the DN-V750/V755 to a video monitor (TV, etc.) with an S-Video input. The brightness
signal (Y) and color difference signal (C) are output separately, resulting in a more defined image than with the composite video signal.
12
RS-232C terminal on a computer
or RS-232C terminal on a serial
controller
Composite video
input on a video
monitor
S-Video input
LAN
on a video
monitor
Analog audio input on
a video monitor's
amplifier, etc.