Denon Professional DN-V750 Mode D'emploi page 16

ENGLISH
8 MAIN UNIT LED INDCATORS
The main unit's LEDs indicate the following:
LED
PLAY
STOP
Indicates the flash memory card (DN-V750) or hard disc drive (DN-V755) access.
ACCESS Lights or flashes when the the flash memory card (DN-V750) or hard disc drive (DN-
V755) is being accessed.
NO CARD/ Lit when no card is loaded (DN-V750).
POWER Lit when power is turned on (DN-V755).
9 CURRENT
2 Current
"Current" refers to the current position for the drive, directory or file.
In the native mode
1. Current directory
This refers to the directory currently being controlled.
2. Current file
This refers to the video or audio file currently being controlled.
10 PLAYBACK USING THE MAIN UNIT CONTROLS
In the Native Mode
The following describes how to set playback using the controls on the DN-V750/V755.
Before doing this, prepare a recorded medium on which video or audio contents are recorded, as described in the section "3
RECORDING MEDIUM CONTENTS
2 Playing
Set MODE selector switches 1, 2 and 3 on the rear panel to the "OFF" positions, connect the DN-V750/V755's video output to an
external monitor and turn on the power.
1
2
Playback is also possible with MODE selector switch 3 set to "ON", but in this case the directories in step 1 are not displayed, so
count the number of times you press the button to select the desired directory.
16
In play mode
In stop mode (not including
script playback)
Off Lit
Lit Off
".
Meaning
During script playback
Lit or
flashing (fast or slow)
Off
Press the "SELECT" button and hold it in for at least 2 seconds. The display
switches between "VIDEO", "AUDIO", "PICTURE" and "SCRIPT", in that
order.
Display the directory containing the file you want to play.
Press the "1PLAY/3PAUSE" button to start playback.
If there are no files to play, "!" is displayed, playback is not performed and
the set stays in the stop mode.
In pause/playback
When there is an error
standby mode
Flashing fast
Flashing slow
Off
Flashes when there is an
access error.