Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
5 NAME AND FUNCTIONS OF PARTS
(1) Front panel
DN-V750
q
q Flash memory card EJECT button (DN-V750 only)
Press this to eject the flash memory card. Be sure the stop
mode is set or the power is turned off when ejecting the flash
memory card. In particular, never eject the card when the flash
memory card access lamp is flashing or lit (except when the
access lamp is flashing to indicate an error).
If the eject operation is performed when the card is being
accessed, the data may be lost and the set may be damaged.
w Flash memory card slot (DN-V750 only)
This is where the flash memory card is inserted. Be sure to
load the flash memory card securely.
e NO CARD/POWER LED
For the DN-V750, this lights when the flash memory card is not
loaded. For the DN-V755, it lights when the set's power is on.
r ACCESS LED
This lights or flashes when the flash memory card (DN-V750)
or hard disc drive (DN-V755) is being accessed.
t STOP LED
This lights when the stop mode is set.
10
w
e rt
y
u
e rt
y
u
y PLAY LED
This lights during playback or this flashes during pause.
u SELECT button
Press this button together with the PLAY/PAUSE button to
perform the reverse skip operation, together with the STOP
button to perform the forward skip operation. In the native
mode, hold this button in for at least 2 seconds to change the
directory.
Note that this button does not work during script playback.
During normal playback, the current directory cannot be
change by pressing this button for at least 2 seconds.
i PLAY/PAUSE button
Press this in the stop or pause mode to start playback. When
pressed during playback, the pause mode is set.
Note that this button does not work during script playback.
o STOP button
Press this to stop playback. During script playback, press the
button for 2 seconds or more to stop script playback.
i
o
i
o
Publicité
