Publicité
Les langues disponibles
Les langues disponibles
7 CONFIGURATION MODE
This chapter describes the operations performed using the configuration menu.
Use the configuration menu and operate the buttons on the front panel to format the medium, set the calendar/clock, and update the
firmware.
Serial and parallel control as well as network operations cannot be performed when in the configuration mode.
2 Launching the configuration menu
***** CONFIGURATION MENU *****
push any key to proceed
[ SELECT ] ... media format
[ PLAY ] ... clock set
[ STOP ] ... firmware update
2 Formatting
Media used on the DN-V750/V755 must be formatted before playback files are recorded on it. On the DN-V755 the recording
medium is already formatted, so there is no need to perform this operation.
***** FORMAT MENU *****
[ SELECT ] ... quick format
[ PLAY ] ... partition & format
[ STOP ] ... return to previous menu
!
ll data will be lost at format !
A
Note that all the files recorded on the medium are deleted when the medium is formatted.
The DN-V750/V755 offers both a quick format and a partition and format function. Built-in HDD and most flash memory cards are
already FAT-formatted when sold, so they can be formatted using the quick format operation.
If quick formatting is not possible, use the partition and format function.
MEDIA FORMAT FINISHED
Please switch operation mode
and push [ STOP ] for reboot
When a recording medium is formatted on the DN-V750/V755, the directories required for the medium to operate on the DN-
V750/V755 are created automatically. (See "Directory (folder) and file structure" on page 7, 8.)
Set only the second MODE selector switch on the rear panel to the "ON"
position, connect the DN-V750/V755's video output to a video monitor and
turn on the power.
The configuration menu appears on the video monitor.
At the configuration menu, press the "SELECT" button to display the format
menu on the video monitor.
At the format menu, press the "SELECT" button to perform the quick format
operation, the "PLAY/PAUSE" button to partition and format. If you do not
want to format, press the "STOP" button to return to the configuration menu.
NOTE:
Once formatting is completed, "MEDIA FORMAT FINISHED" is displayed.
When this is displayed, press the "STOP" button to reboot the DN-
V750
. Set the operating mode in which you want the DN-V750
/V755
start using the MODE selector switches on the rear panel to start the DN-
V750
in that mode.
/V755
ENGLISH
to
/V755
13
Publicité
