Replacing The Tires On The Cleaner - Polaris P91 Manuel Du Propriétaire

5.5 Replacing the Tires on the Cleaner

1. Using your fingers, pull on the inside of the old
tire to remove the tire lip from the wheel. See
Figure 17.
2. Remove the old tire as shown in Figure 18.
Figure 17. Pull on inside of Old Tire
Figure 18. Remove the Old Tire From the Cleaner
3. To replace the tire, position the new tire on the
wheel making sure to orient the tire so that the
tire groove pattern is on the outer side of the
wheel. See Figure 19.
Figure 19. Tire Replacement Orientation
4. Push one side of the tire on to the wheel and
fit the tire onto the wheel as shown in Figure
20.
Figure 20. Push Tire onto the Wheel
5. Work the tire around and onto the wheel.
Refer to Figure 21.
Figure 21. Push the Tire into Place
Page 11