Installing The Cleaner - Polaris TR28P Manuel Utilisateur

Installing the Cleaner

Read the complete owner's
manual before you begin installation.
1
Flush Plumbing Lines
1. Turn on the filtration pump, allow to prime. Then turn on the booster
pump and flush plumbing lines for five minutes.
2. Turn off both pumps.
2
Install the Universal Wall Fitting (UWF)
The UWF installs on pools with a dedicated cleaner return line and a threaded
1-1/2" female pipe fitting.
1. Remove the Universal Wall Fitting (UWF) (n) with Blue Restrictor Disk (o)
from the Quick Disconnect (m).
2. Thread the UWF (n) with Blue Restrictor Disk (o) in place, into the
dedicated cleaner return line opening.
dedicated
cleaner return
4
n
line