Replacing The Tires On The Cleaner - Polaris 9300 Sport Manuel Du Propriétaire

5.4 Replacing the Tires on the Cleaner

1. Pull on the inside of the old tire to remove the tire
lip from the wheel. See Figure 32.
Figure 32. Pull the Old Tire Over the Wheel
2. Remove the old tire as shown in Figure 33.
Figure 33. Remove the Old Tire
3. To replace the tire, position the tire on the wheel
making sure to orient the tire so that the grooves
are on the outer side of the wheel. See Figure 34.
1
!
Figure 34. Tire Replacement Orientation
1
2
4. Push one side of the tire on to the wheel and fit the
rib of the tire in the groove of the wheel as shown
in Figure 35.
Figure 35. Start on One Side of the Tire
5. Work the tire onto the wheel and verify the rib of
the tire is positioned properly within the groove of
the wheel. Refer to Figure 36.
Figure 36. Work the Tire On Around the Wheel
6. Push and position the rib of the inner side of the
tire in the groove of the wheel. Refer to Figure
37. If needed, turn the wheel gently to help with
installation.
Figure 37. Push the Tire into Place on the Wheel
Page 13
2
3
4